Acer Nitro XV272U F3 VESA Mount Size & Fit
Quick answer
The Acer Nitro XV272U F3 uses a 100×100 mm VESA pattern (M4 screws). Screw spec: M4 metric thread. The Nitro XV272U F3 weighs 10.6 lb (4.8 kg) without the stand, so any arm, stand or bracket rated for 100×100 mm and at least 10.6 lb will hold it. Verified against the Acer documentation — see source below.
Nitro XV272U F3 mounting specs
| VESA pattern | 100×100 mm (3.9×3.9 in) |
|---|---|
| Screw thread | M4 |
| Screw length | M4 metric thread; length depends on the arm plate — see the manual |
| Weight without stand | 10.6 lb (4.8 kg) |
| Screen size | 27 in |
| Model year | 2024 |
| Series | Nitro XV2 |
| Known aliases | XV272U F3bmiiprx, UM.HX2AA.307, XV272U F3, Nitro XV272U |
| Source | Manufacturer documentation |
VESA 100x100 confirmed on Acer's own domain (Acer Community answer for XV272U F3 plus Acer Store product pages). Weight without stand (4.8 kg) is from displayspecifications.com, a third party - Acer's US spec page (UM.HX2AA.307) renders its spec table via JS and the weight could not be captured from the manufacturer domain. Documented current 300 Hz variant chosen to represent the Nitro XV272U line; earlier XV272U P/V3 variants also use 100x100 per third-party specs. M4 per FDMI MIS-D; manual/spec page does not print the thread. Manufacturer publishes the stand-free weight in kg; lb converted.
Among the 23 verified 27-inch monitors here, the Nitro XV272U F3 is #14 lightest of 23 at 10.6 lb — the range runs 7.7 to 12.6 lb.
Arm, stand or wall bracket for the Nitro XV272U F3
All three use the same 100×100 mm holes. A desk-clamp arm frees the footprint and adjusts in every axis; a freestanding VESA base replaces a wobbly factory stand; a wall bracket clears the desk but fixes the height. Whatever you pick, the rating must cover 10.6 lb — the full decision guide is VESA monitor mounts.
Wall mounts that fit the Nitro XV272U F3
From our mount database: pattern covers 100×100 mm, the rating clears the Nitro XV272U F3's 10.6 lb with a 20% margin, and 27-inch screens are in range.
WALI 1330LM Articulating 13-42
Small-TV arm for kitchens and offices; folds to 2.6 in from the wall.
Supports VESA 75×75 up to 200×200 mm and 44 lb — clears the Nitro XV272U F3's 100×100 mm / 10.6 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the Nitro XV272U F3's 100×100 mm / 10.6 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the Nitro XV272U F3's 100×100 mm / 10.6 lb.
Wall: single stud OK
Double-check before buying
- Pop off any plastic caps and confirm 4 threaded holes at 100 mm across and 100 mm vertically, center-to-center.
- Check the M4 bolts seat by hand before torquing — thin monitor housings punish over-long screws.
- Compare the model code on the rear label with this page (Nitro XV272U F3) — same-series panels can differ.
Frequently asked questions
What VESA pattern does the Acer Nitro XV272U F3 use?
The Acer Nitro XV272U F3 uses a 100×100 mm VESA pattern — 100 mm between hole centers horizontally and 100 mm vertically. Any monitor arm, stand or wall bracket listing 100×100 mm fits directly. Confirm on the back of your unit, since some retail variants of a series differ.
What screws does the Nitro XV272U F3 need for an arm or mount?
The Nitro XV272U F3 takes M4 metric screws. Documented spec: M4 metric thread; length depends on the arm plate — see the manual. Most arms ship M4 hardware in two lengths — hand-test the shorter one first; a bolt that bottoms out can damage the housing.
How much does the Nitro XV272U F3 weigh without the stand?
The Nitro XV272U F3 weighs 10.6 lb (4.8 kg) without the stand. Typical desk arms list roughly 9–20 lb per screen, so check your arm's exact rating — and its supported screen-size range — against these numbers before buying.
Will a standard monitor arm hold the Nitro XV272U F3?
Any arm that lists the 100×100 mm pattern, carries at least 10.6 lb and covers 27-inch screens will hold it. The desk matters too: clamps need a solid edge; glass desks call for a grommet mount or freestanding base.
Can the Nitro XV272U F3 be wall-mounted?
Yes — the same 100×100 mm holes work on wall brackets. 3 wall mount(s) in our database clear the Nitro XV272U F3's 10.6 lb and 27-inch size with a 20% margin; small fixed or articulating brackets sold for compact TVs are the usual pick.