Alienware AW2725DF VESA Mount Size & Fit
Quick answer
The Alienware AW2725DF uses a 100×100 mm VESA pattern (M4 screws). Screw spec: M4 x 10 mm screws. The AW2725DF weighs 9.5 lb (4.3 kg) without the stand, so any arm, stand or bracket rated for 100×100 mm and at least 9.5 lb will hold it. Verified against the Alienware documentation — see source below.
AW2725DF mounting specs
| VESA pattern | 100×100 mm (3.9×3.9 in) |
|---|---|
| Screw thread | M4 |
| Screw length | M4 x 10 mm screws per Dell user's guide VESA wall-mounting section (p.41) |
| Weight without stand | 9.5 lb (4.3 kg) |
| Screen size | 27 in |
| Model year | 2024 |
| Series | Alienware 27 360Hz QD-OLED Gaming Monitor |
| Known aliases | 210-BLJD |
| Source | Manufacturer documentation |
Flat QD-OLED panel. Tool-less stand design leaves a recessed 100x100 VESA area; Dell KB 000197983 says spacers may be required with larger third-party arm plates. Dell requires a mount rated for at least 14.00 kg (31 lb). 9.48 lb is from the Dell US product page; 4.30 kg is the same figure on Dell's international pages for the same global model.
Among the 23 verified 27-inch monitors here, the AW2725DF is #9 lightest of 23 at 9.5 lb — the range runs 7.7 to 12.6 lb.
Model-specific mounting notes
Spacers required
Alienware documents standoff spacers between the bracket and the AW2725DF's housing. Skipping them can crack the shell or leave the plate loose — keep the factory hardware with the monitor.
Arm, stand or wall bracket for the AW2725DF
All three use the same 100×100 mm holes. A desk-clamp arm frees the footprint and adjusts in every axis; a freestanding VESA base replaces a wobbly factory stand; a wall bracket clears the desk but fixes the height. Whatever you pick, the rating must cover 9.5 lb — the full decision guide is VESA monitor mounts.
Wall mounts that fit the AW2725DF
From our mount database: pattern covers 100×100 mm, the rating clears the AW2725DF's 9.5 lb with a 20% margin, and 27-inch screens are in range.
WALI 1330LM Articulating 13-42
Small-TV arm for kitchens and offices; folds to 2.6 in from the wall.
Supports VESA 75×75 up to 200×200 mm and 44 lb — clears the AW2725DF's 100×100 mm / 9.5 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the AW2725DF's 100×100 mm / 9.5 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the AW2725DF's 100×100 mm / 9.5 lb.
Wall: single stud OK
Double-check before buying
- Pop off any plastic caps and confirm 4 threaded holes at 100 mm across and 100 mm vertically, center-to-center.
- Check the M4 bolts seat by hand before torquing — thin monitor housings punish over-long screws.
- Compare the model code on the rear label with this page (AW2725DF) — same-series panels can differ.
Frequently asked questions
What VESA pattern does the Alienware AW2725DF use?
The Alienware AW2725DF uses a 100×100 mm VESA pattern — 100 mm between hole centers horizontally and 100 mm vertically. Any monitor arm, stand or wall bracket listing 100×100 mm fits directly. Confirm on the back of your unit, since some retail variants of a series differ.
What screws does the AW2725DF need for an arm or mount?
The AW2725DF takes M4 metric screws. Documented spec: M4 x 10 mm screws per Dell user's guide VESA wall-mounting section (p.41). Most arms ship M4 hardware in two lengths — hand-test the shorter one first; a bolt that bottoms out can damage the housing.
How much does the AW2725DF weigh without the stand?
The AW2725DF weighs 9.5 lb (4.3 kg) without the stand. Typical desk arms list roughly 9–20 lb per screen, so check your arm's exact rating — and its supported screen-size range — against these numbers before buying.
Will a standard monitor arm hold the AW2725DF?
Any arm that lists the 100×100 mm pattern, carries at least 9.5 lb and covers 27-inch screens will hold it. The desk matters too: clamps need a solid edge; glass desks call for a grommet mount or freestanding base.
Can the AW2725DF be wall-mounted?
Yes — the same 100×100 mm holes work on wall brackets. 3 wall mount(s) in our database clear the AW2725DF's 9.5 lb and 27-inch size with a 20% margin; small fixed or articulating brackets sold for compact TVs are the usual pick.