Sony XR-65A80K VESA Size & Mount Fit
Quick answer
The Sony XR-65A80K uses a 300×300 mm VESA pattern (M6 screws). Screw spec: Sony's 2022 bracket chart: screw length 8-12 mm from the bracket attachment surface. The XR-65A80K weighs 50.7 lb (23 kg) without the stand. Any mount rated for VESA 300×300 or larger and at least 65 lb will fit the XR-65A80K. Verified against the Sony documentation — see source below.
XR-65A80K mounting specs
| VESA pattern | 300×300 mm (11.8×11.8 in) |
|---|---|
| Screw thread | M6 |
| Screw length | Sony's 2022 bracket chart: screw length 8-12 mm from the bracket attachment surface; M6 thread - confirm in your manual |
| Weight without stand | 50.7 lb (23 kg) |
| Stand width | 46.6 in — feet at their widest position |
| Screen size | 65 in |
| Model year | 2022 |
| Series | A80K OLED |
| Known aliases | XR65A80K |
| Source | Manufacturer documentation |
50.7 lb (23 kg) per Sony's spec page - plan a 65 lb-plus mount rating; shares the A83K/A84K retail variants. Sony's stand offers three settings on this size too - 46.6 in standard and 33.4 in narrow, with a raised soundbar option.
Among the 21 verified 65-inch TVs in our database, the XR-65A80K is #17 lightest of 21 at 50.7 lb — the 65-inch range here runs 30.9 to 56.4 lb. Within Sony, the KD-55X80K, KD-65X80K, KD-75X80K share the XR-65A80K's 300×300 mm pattern.
Mounts that fit the XR-65A80K
Filtered from our mount database: pattern covers 300×300 mm, rating is at least 65 lb (20% margin over the XR-65A80K's 50.7 lb), and the 65-inch screen is within the listed range.
EchoGear EGLF2 Full Motion
Smooth dual-arm full motion with 22 in of extension for corner installs.
Supports VESA 100×100 up to 600×400 mm and 125 lb — clears the XR-65A80K's 300×300 mm / 50.7 lb.
Wall: 16-in dual stud required
EchoGear EGLT1 Tilting
Deep 15-degree tilt for bedroom and above-fireplace placements.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the XR-65A80K's 300×300 mm / 50.7 lb.
Wall: 16-in dual stud required
EchoGear EGLL1 Low-Profile Fixed
Ultra-low-profile fixed mount that keeps the TV about an inch off the wall.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the XR-65A80K's 300×300 mm / 50.7 lb.
Wall: 16-in dual stud required
Mount-It! MI-509B Ceiling
Ceiling mount for larger screens with tilt and telescoping height.
Supports VESA 100×100 up to 600×400 mm and 110 lb — clears the XR-65A80K's 300×300 mm / 50.7 lb.
Wall: lag-bolt into a ceiling joist per the manual
Pipishell PISF1 Fixed
Heavy-duty fixed plate for big panels; sits low and rigid.
Supports VESA 200×200 up to 600×400 mm and 132 lb — clears the XR-65A80K's 300×300 mm / 50.7 lb.
Wall: 16-in dual stud required
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the XR-65A80K
The XR-65A80K takes M6 bolts: Sony's 2022 bracket chart: screw length 8-12 mm from the bracket attachment surface; M6 thread - confirm in your manual. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the XR-65A80K on furniture instead?
The XR-65A80K's legs span 46.6 in at their widest position — it fits consoles at least 49 in wide, so both feet sit fully on the surface with a safety margin.
Furniture narrower than 49 in? A universal pedestal stand bolts into the same 300×300 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the XR-65A80K's 50.7 lb.
Replacement remote for the XR-65A80K
Sony Bravia Premium Voice Remote (2022) — part number RMF-TX900U — is the matching remote for the XR-65A80K. Premium backlit Bluetooth/IR voice remote with a remote-finder feature. OEM dealer stock originally shipped with the XR-55/65A80K; the cheaper RMF-TX800U also works on the A80K if backlighting isn't needed.
Full compatibility list, substitutes and ordering advice: RMF-TX900U remote page. Order by the part number, not the TV size — one remote covers the platform. All Sony remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 300 mm across and 300 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (XR-65A80K) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the XR-65A80K: 300×300 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Sony XR-65A80K use?
The Sony XR-65A80K uses a 300×300 mm VESA pattern — 300 mm between hole centers horizontally and 300 mm vertically (about 11.8×11.8 in). Any bracket whose supported range covers 300×300 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the XR-65A80K need for wall mounting?
The XR-65A80K takes M6 metric screws. Documented length: Sony's 2022 bracket chart: screw length 8-12 mm from the bracket attachment surface; M6 thread - confirm in your manual. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the XR-65A80K with a hand-tightened test screw before torquing anything down.
How much does the XR-65A80K weigh without the stand?
The XR-65A80K weighs 50.7 lb (23 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 65 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the XR-65A80K?
A bracket sold as 400×400-only will not line up with the XR-65A80K's 300×300 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 300×300 mm, it fits directly. If not, a VESA adapter plate (300×300→400×400) bridges the difference; see our adapter guide.
How far apart are the legs on the XR-65A80K?
The XR-65A80K's feet at their widest position span about 46.6 in across the outside edges. A console at least 49 in wide lets both feet sit fully on the surface (the manual also documents a narrower inner position). Narrower furniture calls for a pedestal stand that bolts into the 300×300 mm VESA holes.
What replacement remote works with the XR-65A80K?
Sony Bravia Premium Voice Remote (2022) (part RMF-TX900U) is the matching remote for the XR-65A80K. Premium backlit Bluetooth/IR voice remote with a remote-finder feature. OEM dealer stock originally shipped with the XR-55/65A80K; the cheaper RMF-TX800U also works on the A80K if backlighting isn't needed. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the XR-65A80K be mounted on a full-motion bracket?
Yes. At 50.7 lb, the XR-65A80K is within range of full-motion arms rated 65 lb or higher — 3 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.