Dell P2422H VESA Mount Size & Fit
Quick answer
The Dell P2422H uses a 100×100 mm VESA pattern (M4 screws). Screw spec: M4 x 10 mm. The P2422H weighs 7.4 lb (3.4 kg) without the stand, so any arm, stand or bracket rated for 100×100 mm and at least 7.4 lb will hold it. Verified against the Dell documentation — see source below.
P2422H mounting specs
| VESA pattern | 100×100 mm (3.9×3.9 in) |
|---|---|
| Screw thread | M4 |
| Screw length | M4 x 10 mm per the combined P2222H/P2422H/P2722H user guide wall-mounting section |
| Weight without stand | 7.4 lb (3.4 kg) |
| Screen size | 24 in |
| Model year | 2021 |
| Series | P Series |
| Known aliases | P2422H WOST |
| Source | Manufacturer documentation |
23.8-inch panel marketed as Dell 24. Dell US spec page publishes 7.4 lb without stand (lb only, so kg set to 0). The user guide covers P2222H/P2422H/P2722H in one physical-characteristics table; a 2.82 kg figure circulating online belongs to the smaller P2222H column, not the P2422H. Sold as a WOST (without stand) SKU for VESA arm deployments.
Among the 4 verified 24-inch monitors here, the P2422H is #3 lightest of 4 at 7.4 lb — the range runs 6 to 7.7 lb.
Arm, stand or wall bracket for the P2422H
All three use the same 100×100 mm holes. A desk-clamp arm frees the footprint and adjusts in every axis; a freestanding VESA base replaces a wobbly factory stand; a wall bracket clears the desk but fixes the height. Whatever you pick, the rating must cover 7.4 lb — the full decision guide is VESA monitor mounts.
Wall mounts that fit the P2422H
From our mount database: pattern covers 100×100 mm, the rating clears the P2422H's 7.4 lb with a 20% margin, and 24-inch screens are in range.
WALI 1330LM Articulating 13-42
Small-TV arm for kitchens and offices; folds to 2.6 in from the wall.
Supports VESA 75×75 up to 200×200 mm and 44 lb — clears the P2422H's 100×100 mm / 7.4 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the P2422H's 100×100 mm / 7.4 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the P2422H's 100×100 mm / 7.4 lb.
Wall: single stud OK
Double-check before buying
- Pop off any plastic caps and confirm 4 threaded holes at 100 mm across and 100 mm vertically, center-to-center.
- Check the M4 bolts seat by hand before torquing — thin monitor housings punish over-long screws.
- Compare the model code on the rear label with this page (P2422H) — same-series panels can differ.
Frequently asked questions
What VESA pattern does the Dell P2422H use?
The Dell P2422H uses a 100×100 mm VESA pattern — 100 mm between hole centers horizontally and 100 mm vertically. Any monitor arm, stand or wall bracket listing 100×100 mm fits directly. Confirm on the back of your unit, since some retail variants of a series differ.
What screws does the P2422H need for an arm or mount?
The P2422H takes M4 metric screws. Documented spec: M4 x 10 mm per the combined P2222H/P2422H/P2722H user guide wall-mounting section. Most arms ship M4 hardware in two lengths — hand-test the shorter one first; a bolt that bottoms out can damage the housing.
How much does the P2422H weigh without the stand?
The P2422H weighs 7.4 lb (3.4 kg) without the stand. Typical desk arms list roughly 9–20 lb per screen, so check your arm's exact rating — and its supported screen-size range — against these numbers before buying.
Will a standard monitor arm hold the P2422H?
Any arm that lists the 100×100 mm pattern, carries at least 7.4 lb and covers 24-inch screens will hold it. The desk matters too: clamps need a solid edge; glass desks call for a grommet mount or freestanding base.
Can the P2422H be wall-mounted?
Yes — the same 100×100 mm holes work on wall brackets. 3 wall mount(s) in our database clear the P2422H's 7.4 lb and 24-inch size with a 20% margin; small fixed or articulating brackets sold for compact TVs are the usual pick.