Dell U2723QE VESA Mount Size & Fit
Quick answer
The Dell U2723QE uses a 100×100 mm VESA pattern (M4 screws). Screw spec: M4 x 10 mm. The U2723QE weighs 9.9 lb (4.5 kg) without the stand, so any arm, stand or bracket rated for 100×100 mm and at least 9.9 lb will hold it. Verified against the Dell documentation — see source below.
U2723QE mounting specs
| VESA pattern | 100×100 mm (3.9×3.9 in) |
|---|---|
| Screw thread | M4 |
| Screw length | M4 x 10 mm per the U2723QX/U2723QE/U3223QE user guide wall-mounting section |
| Weight without stand | 9.9 lb (4.5 kg) |
| Screen size | 27 in |
| Model year | 2022 |
| Series | UltraSharp |
| Known aliases | U2723QX, U2723QEt |
| Source | Manufacturer documentation |
User guide covers U2723QX/U2723QE/U3223QE (regulatory U2723QEt); U2723QX is the retail-channel variant of the same panel. Weight without stand assembly 4.48 kg (9.88 lb) is the wall/VESA-mount figure with no cables.
Among the 23 verified 27-inch monitors here, the U2723QE is #11 lightest of 23 at 9.9 lb — the range runs 7.7 to 12.6 lb.
Arm, stand or wall bracket for the U2723QE
All three use the same 100×100 mm holes. A desk-clamp arm frees the footprint and adjusts in every axis; a freestanding VESA base replaces a wobbly factory stand; a wall bracket clears the desk but fixes the height. Whatever you pick, the rating must cover 9.9 lb — the full decision guide is VESA monitor mounts.
Wall mounts that fit the U2723QE
From our mount database: pattern covers 100×100 mm, the rating clears the U2723QE's 9.9 lb with a 20% margin, and 27-inch screens are in range.
WALI 1330LM Articulating 13-42
Small-TV arm for kitchens and offices; folds to 2.6 in from the wall.
Supports VESA 75×75 up to 200×200 mm and 44 lb — clears the U2723QE's 100×100 mm / 9.9 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the U2723QE's 100×100 mm / 9.9 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the U2723QE's 100×100 mm / 9.9 lb.
Wall: single stud OK
Double-check before buying
- Pop off any plastic caps and confirm 4 threaded holes at 100 mm across and 100 mm vertically, center-to-center.
- Check the M4 bolts seat by hand before torquing — thin monitor housings punish over-long screws.
- Compare the model code on the rear label with this page (U2723QE) — same-series panels can differ.
Frequently asked questions
What VESA pattern does the Dell U2723QE use?
The Dell U2723QE uses a 100×100 mm VESA pattern — 100 mm between hole centers horizontally and 100 mm vertically. Any monitor arm, stand or wall bracket listing 100×100 mm fits directly. Confirm on the back of your unit, since some retail variants of a series differ.
What screws does the U2723QE need for an arm or mount?
The U2723QE takes M4 metric screws. Documented spec: M4 x 10 mm per the U2723QX/U2723QE/U3223QE user guide wall-mounting section. Most arms ship M4 hardware in two lengths — hand-test the shorter one first; a bolt that bottoms out can damage the housing.
How much does the U2723QE weigh without the stand?
The U2723QE weighs 9.9 lb (4.5 kg) without the stand. Typical desk arms list roughly 9–20 lb per screen, so check your arm's exact rating — and its supported screen-size range — against these numbers before buying.
Will a standard monitor arm hold the U2723QE?
Any arm that lists the 100×100 mm pattern, carries at least 9.9 lb and covers 27-inch screens will hold it. The desk matters too: clamps need a solid edge; glass desks call for a grommet mount or freestanding base.
Can the U2723QE be wall-mounted?
Yes — the same 100×100 mm holes work on wall brackets. 3 wall mount(s) in our database clear the U2723QE's 9.9 lb and 27-inch size with a 20% margin; small fixed or articulating brackets sold for compact TVs are the usual pick.