Gigabyte M27Q VESA Mount Size & Fit
Quick answer
The Gigabyte M27Q uses a 100×100 mm VESA pattern (M4 screws). Screw spec: Gigabyte's M27Q user manual specifies M4 x 20 mm minimum wall-mount screws. The M27Q weighs 7.3 lb (3.3 kg) without the stand, so any arm, stand or bracket rated for 100×100 mm and at least 7.3 lb will hold it. Verified against the Gigabyte documentation — see source below.
M27Q mounting specs
Gigabyte's M27Q rev 1.0 user manual specifications appendix prints 3.3 +/-0.5 kg without stand (5.5 +/-0.5 kg with) - a manufacturer head-only figure (7.28 lb converted). Rev 2.0 is a different panel (3.5 kg without stand) sold under the same name; match the revision on the rear label. The recessed VESA pocket needs M4 x 20 mm minimum screws per the same manual.
Weight vs. required arm rating
Among the 25 verified 27-inch monitors here, the M27Q is the lightest at 7.3 lb — the range runs 7.3 to 12.6 lb.
Arm, stand or wall bracket for the M27Q
All three use the same 100×100 mm holes. A desk-clamp arm frees the footprint and adjusts in every axis; a freestanding VESA base replaces a wobbly factory stand; a wall bracket clears the desk but fixes the height. Whatever you pick, the rating must cover 7.3 lb — the full decision guide is VESA monitor mounts.
Wall mounts that fit the M27Q
From our mount database: pattern covers 100×100 mm, the rating clears the M27Q's 7.3 lb with a 20% margin, and 27-inch screens are in range.
WALI 1330LM Articulating 13-42
Small-TV arm for kitchens and offices; folds to 2.6 in from the wall.
Supports VESA 75×75 up to 200×200 mm and 44 lb — clears the M27Q's 100×100 mm / 7.3 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the M27Q's 100×100 mm / 7.3 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the M27Q's 100×100 mm / 7.3 lb.
Wall: single stud OK
Double-check before buying
- Pop off any plastic caps and confirm 4 threaded holes at 100 mm across and 100 mm vertically, center-to-center.
- Check the M4 bolts seat by hand before torquing — thin monitor housings punish over-long screws.
- Compare the model code on the rear label with this page (M27Q) — same-series panels can differ.
Frequently asked questions
What VESA pattern does the Gigabyte M27Q use?
The Gigabyte M27Q uses a 100×100 mm VESA pattern — 100 mm between hole centers horizontally and 100 mm vertically. Any monitor arm, stand or wall bracket listing 100×100 mm fits directly. Confirm on the back of your unit, since some retail variants of a series differ.
What screws does the M27Q need for an arm or mount?
The M27Q takes M4 metric screws. Documented spec: Gigabyte's M27Q user manual specifies M4 x 20 mm minimum wall-mount screws (VESA pocket is recessed); standard M4 x 10 screws may be too short.. Most arms ship M4 hardware in two lengths — hand-test the shorter one first; a bolt that bottoms out can damage the housing.
How much does the M27Q weigh without the stand?
The M27Q weighs 7.3 lb (3.3 kg) without the stand. Typical desk arms list roughly 9–20 lb per screen, so check your arm's exact rating — and its supported screen-size range — against these numbers before buying.
Will a standard monitor arm hold the M27Q?
Any arm that lists the 100×100 mm pattern, carries at least 7.3 lb and covers 27-inch screens will hold it. The desk matters too: clamps need a solid edge; glass desks call for a grommet mount or freestanding base.
Can the M27Q be wall-mounted?
Yes — the same 100×100 mm holes work on wall brackets. 3 wall mount(s) in our database clear the M27Q's 7.3 lb and 27-inch size with a 20% margin; small fixed or articulating brackets sold for compact TVs are the usual pick.