HP Pavilion 32 QHD VESA Mount Size & Fit
Quick answer
The HP Pavilion 32 QHD uses a 100×100 mm VESA pattern (M4 screws). Screw spec: HP user guide: four 4 mm, 0.7 pitch, 10 mm long screws. The Pavilion 32 QHD weighs 15.6 lb (7.1 kg) without the stand, so any arm, stand or bracket rated for 100×100 mm and at least 15.6 lb will hold it. Verified against the HP documentation — see source below.
Pavilion 32 QHD mounting specs
HP's user guide (doc L33176-001) Appendix A prints 'Weight without stand: 7.06 kg / 15.56 lbs' (with stand 8.74 kg / 19.27 lb). Panel has no direct holes: it mounts via HP's 100 x 100 mm accessory bracket that ships in the box (replacement part L37243-801); the 7.06 kg figure is the bare head. Earlier third-party 5.15 kg claims are refuted by the manual.
Weight vs. required arm rating
Among the 5 verified 32-inch monitors here, the Pavilion 32 QHD is #4 lightest of 5 at 15.6 lb — the range runs 12.1 to 16.3 lb.
Model-specific mounting notes
Adapter bracket in the box
HP ships a dedicated VESA adapter bracket with the Pavilion 32 QHD — fit it first, then hang the monitor on any standard 100×100 mm arm or mount. Don't discard it with the packaging; replacements are model-specific.
Arm, stand or wall bracket for the Pavilion 32 QHD
All three use the same 100×100 mm holes. A desk-clamp arm frees the footprint and adjusts in every axis; a freestanding VESA base replaces a wobbly factory stand; a wall bracket clears the desk but fixes the height. Whatever you pick, the rating must cover 15.6 lb — the full decision guide is VESA monitor mounts.
Wall mounts that fit the Pavilion 32 QHD
From our mount database: pattern covers 100×100 mm, the rating clears the Pavilion 32 QHD's 15.6 lb with a 20% margin, and 32-inch screens are in range.
WALI 1330LM Articulating 13-42
Small-TV arm for kitchens and offices; folds to 2.6 in from the wall.
Supports VESA 75×75 up to 200×200 mm and 44 lb — clears the Pavilion 32 QHD's 100×100 mm / 15.6 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the Pavilion 32 QHD's 100×100 mm / 15.6 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the Pavilion 32 QHD's 100×100 mm / 15.6 lb.
Wall: single stud OK
Double-check before buying
- Pop off any plastic caps and confirm 4 threaded holes at 100 mm across and 100 mm vertically, center-to-center.
- Check the M4 bolts seat by hand before torquing — thin monitor housings punish over-long screws.
- Compare the model code on the rear label with this page (Pavilion 32 QHD) — same-series panels can differ.
Frequently asked questions
What VESA pattern does the HP Pavilion 32 QHD use?
The HP Pavilion 32 QHD uses a 100×100 mm VESA pattern — 100 mm between hole centers horizontally and 100 mm vertically. Any monitor arm, stand or wall bracket listing 100×100 mm fits directly. Confirm on the back of your unit, since some retail variants of a series differ.
What screws does the Pavilion 32 QHD need for an arm or mount?
The Pavilion 32 QHD takes M4 metric screws. Documented spec: HP user guide: four 4 mm, 0.7 pitch, 10 mm long screws (M4 x 10); longer screws may damage the monitor. Most arms ship M4 hardware in two lengths — hand-test the shorter one first; a bolt that bottoms out can damage the housing.
How much does the Pavilion 32 QHD weigh without the stand?
The Pavilion 32 QHD weighs 15.6 lb (7.1 kg) without the stand. Typical desk arms list roughly 9–20 lb per screen, so check your arm's exact rating — and its supported screen-size range — against these numbers before buying.
Will a standard monitor arm hold the Pavilion 32 QHD?
Any arm that lists the 100×100 mm pattern, carries at least 15.6 lb and covers 32-inch screens will hold it. The desk matters too: clamps need a solid edge; glass desks call for a grommet mount or freestanding base.
Can the Pavilion 32 QHD be wall-mounted?
Yes — the same 100×100 mm holes work on wall brackets. 3 wall mount(s) in our database clear the Pavilion 32 QHD's 15.6 lb and 32-inch size with a 20% margin; small fixed or articulating brackets sold for compact TVs are the usual pick.