Lenovo Q27q-10 VESA Mount Size & Fit
Quick answer
The Lenovo Q27q-10 uses a 100×100 mm VESA pattern (M4 screws). Screw spec: M4 x 10 mm. The Q27q-10 weighs 7.8 lb (3.5 kg) without the stand, so any arm, stand or bracket rated for 100×100 mm and at least 7.8 lb will hold it. Verified against the Lenovo documentation — see source below.
Q27q-10 mounting specs
| VESA pattern | 100×100 mm (3.9×3.9 in) |
|---|---|
| Screw thread | M4 |
| Screw length | M4 x 10 mm per Lenovo user guide wall-mounting section; UL Listed bracket with min 8 kg load required |
| Weight without stand | 7.8 lb (3.5 kg) |
| Screen size | 27 in |
| Model year | 2019 |
| Series | Q Series |
| Known aliases | 65F4GCC3US, 65F4GAC3WW |
| Source | Manufacturer documentation |
VESA situation often doubted because of the slim bent-tube stand design, but Lenovo documents 100x100 VESA (mount sold separately); Lenovo only publishes the without-stand weight in kg. Manufacturer publishes the stand-free weight in kg; lb converted.
Among the 23 verified 27-inch monitors here, the Q27q-10 is #2 lightest of 23 at 7.8 lb — the range runs 7.7 to 12.6 lb.
Arm, stand or wall bracket for the Q27q-10
All three use the same 100×100 mm holes. A desk-clamp arm frees the footprint and adjusts in every axis; a freestanding VESA base replaces a wobbly factory stand; a wall bracket clears the desk but fixes the height. Whatever you pick, the rating must cover 7.8 lb — the full decision guide is VESA monitor mounts.
Wall mounts that fit the Q27q-10
From our mount database: pattern covers 100×100 mm, the rating clears the Q27q-10's 7.8 lb with a 20% margin, and 27-inch screens are in range.
WALI 1330LM Articulating 13-42
Small-TV arm for kitchens and offices; folds to 2.6 in from the wall.
Supports VESA 75×75 up to 200×200 mm and 44 lb — clears the Q27q-10's 100×100 mm / 7.8 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the Q27q-10's 100×100 mm / 7.8 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the Q27q-10's 100×100 mm / 7.8 lb.
Wall: single stud OK
Double-check before buying
- Pop off any plastic caps and confirm 4 threaded holes at 100 mm across and 100 mm vertically, center-to-center.
- Check the M4 bolts seat by hand before torquing — thin monitor housings punish over-long screws.
- Compare the model code on the rear label with this page (Q27q-10) — same-series panels can differ.
Frequently asked questions
What VESA pattern does the Lenovo Q27q-10 use?
The Lenovo Q27q-10 uses a 100×100 mm VESA pattern — 100 mm between hole centers horizontally and 100 mm vertically. Any monitor arm, stand or wall bracket listing 100×100 mm fits directly. Confirm on the back of your unit, since some retail variants of a series differ.
What screws does the Q27q-10 need for an arm or mount?
The Q27q-10 takes M4 metric screws. Documented spec: M4 x 10 mm per Lenovo user guide wall-mounting section; UL Listed bracket with min 8 kg load required. Most arms ship M4 hardware in two lengths — hand-test the shorter one first; a bolt that bottoms out can damage the housing.
How much does the Q27q-10 weigh without the stand?
The Q27q-10 weighs 7.8 lb (3.5 kg) without the stand. Typical desk arms list roughly 9–20 lb per screen, so check your arm's exact rating — and its supported screen-size range — against these numbers before buying.
Will a standard monitor arm hold the Q27q-10?
Any arm that lists the 100×100 mm pattern, carries at least 7.8 lb and covers 27-inch screens will hold it. The desk matters too: clamps need a solid edge; glass desks call for a grommet mount or freestanding base.
Can the Q27q-10 be wall-mounted?
Yes — the same 100×100 mm holes work on wall brackets. 3 wall mount(s) in our database clear the Q27q-10's 7.8 lb and 27-inch size with a 20% margin; small fixed or articulating brackets sold for compact TVs are the usual pick.