Lenovo Y27q-20 VESA Mount Size & Fit
Quick answer
The Lenovo Y27q-20 uses a 100×100 mm VESA pattern (M4 screws). Screw spec: M4 metric thread. The Y27q-20 weighs 9.6 lb (4.4 kg) without the stand, so any arm, stand or bracket rated for 100×100 mm and at least 9.6 lb will hold it. Verified against the Lenovo documentation — see source below.
Y27q-20 mounting specs
| VESA pattern | 100×100 mm (3.9×3.9 in) |
|---|---|
| Screw thread | M4 |
| Screw length | M4 metric thread; length depends on the arm plate — see the manual |
| Weight without stand | 9.6 lb (4.4 kg) |
| Screen size | 27 in |
| Model year | 2019 |
| Series | Legion |
| Known aliases | 65EEGAC1US, 65EEGAC1WW, 65F0GAC1EU |
| Source | Manufacturer documentation |
27-inch QHD 165 Hz gaming monitor, flat panel; M4 per FDMI MIS-D — PSREF does not print the thread. PSREF now lists the model as withdrawn but the spec PDF remains published.
Among the 23 verified 27-inch monitors here, the Y27q-20 is #10 lightest of 23 at 9.6 lb — the range runs 7.7 to 12.6 lb.
Arm, stand or wall bracket for the Y27q-20
All three use the same 100×100 mm holes. A desk-clamp arm frees the footprint and adjusts in every axis; a freestanding VESA base replaces a wobbly factory stand; a wall bracket clears the desk but fixes the height. Whatever you pick, the rating must cover 9.6 lb — the full decision guide is VESA monitor mounts.
Wall mounts that fit the Y27q-20
From our mount database: pattern covers 100×100 mm, the rating clears the Y27q-20's 9.6 lb with a 20% margin, and 27-inch screens are in range.
WALI 1330LM Articulating 13-42
Small-TV arm for kitchens and offices; folds to 2.6 in from the wall.
Supports VESA 75×75 up to 200×200 mm and 44 lb — clears the Y27q-20's 100×100 mm / 9.6 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the Y27q-20's 100×100 mm / 9.6 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the Y27q-20's 100×100 mm / 9.6 lb.
Wall: single stud OK
Double-check before buying
- Pop off any plastic caps and confirm 4 threaded holes at 100 mm across and 100 mm vertically, center-to-center.
- Check the M4 bolts seat by hand before torquing — thin monitor housings punish over-long screws.
- Compare the model code on the rear label with this page (Y27q-20) — same-series panels can differ.
Frequently asked questions
What VESA pattern does the Lenovo Y27q-20 use?
The Lenovo Y27q-20 uses a 100×100 mm VESA pattern — 100 mm between hole centers horizontally and 100 mm vertically. Any monitor arm, stand or wall bracket listing 100×100 mm fits directly. Confirm on the back of your unit, since some retail variants of a series differ.
What screws does the Y27q-20 need for an arm or mount?
The Y27q-20 takes M4 metric screws. Documented spec: M4 metric thread; length depends on the arm plate — see the manual. Most arms ship M4 hardware in two lengths — hand-test the shorter one first; a bolt that bottoms out can damage the housing.
How much does the Y27q-20 weigh without the stand?
The Y27q-20 weighs 9.6 lb (4.4 kg) without the stand. Typical desk arms list roughly 9–20 lb per screen, so check your arm's exact rating — and its supported screen-size range — against these numbers before buying.
Will a standard monitor arm hold the Y27q-20?
Any arm that lists the 100×100 mm pattern, carries at least 9.6 lb and covers 27-inch screens will hold it. The desk matters too: clamps need a solid edge; glass desks call for a grommet mount or freestanding base.
Can the Y27q-20 be wall-mounted?
Yes — the same 100×100 mm holes work on wall brackets. 3 wall mount(s) in our database clear the Y27q-20's 9.6 lb and 27-inch size with a 20% margin; small fixed or articulating brackets sold for compact TVs are the usual pick.