MSI G274QPF-QD VESA Mount Size & Fit
Quick answer
The MSI G274QPF-QD uses a 75×75 mm VESA pattern (M4 screws). Screw spec: MSI user guide specifies VESA plate 75 x 75 mm with M4 x 10 mm screws. The G274QPF-QD weighs 8.9 lb (4.1 kg) without the stand, so any arm, stand or bracket rated for 75×75 mm and at least 8.9 lb will hold it. Verified against the MSI documentation — see source below.
G274QPF-QD mounting specs
msi.com's own spec page prints 'Without Stand: 4.05 kg' alongside the 6.05 kg net weight - a manufacturer-published head-only figure (8.93 lb converted). Uses 75 x 75 mm VESA, not 100 x 100 - the arm needs 75 mm holes or a 75-to-100 adapter plate. The manual's 6.0/8.1 kg line is the with-stand net/gross pair.
Weight vs. required arm rating
Among the 25 verified 27-inch monitors here, the G274QPF-QD is #7 lightest of 25 at 8.9 lb — the range runs 7.3 to 12.6 lb.
Arm, stand or wall bracket for the G274QPF-QD
All three use the same 75×75 mm holes. A desk-clamp arm frees the footprint and adjusts in every axis; a freestanding VESA base replaces a wobbly factory stand; a wall bracket clears the desk but fixes the height. Whatever you pick, the rating must cover 8.9 lb — the full decision guide is VESA monitor mounts.
Wall mounts that fit the G274QPF-QD
From our mount database: pattern covers 75×75 mm, the rating clears the G274QPF-QD's 8.9 lb with a 20% margin, and 27-inch screens are in range.
WALI 1330LM Articulating 13-42
Small-TV arm for kitchens and offices; folds to 2.6 in from the wall.
Supports VESA 75×75 up to 200×200 mm and 44 lb — clears the G274QPF-QD's 75×75 mm / 8.9 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the G274QPF-QD's 75×75 mm / 8.9 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the G274QPF-QD's 75×75 mm / 8.9 lb.
Wall: single stud OK
Double-check before buying
- Pop off any plastic caps and confirm 4 threaded holes at 75 mm across and 75 mm vertically, center-to-center.
- Check the M4 bolts seat by hand before torquing — thin monitor housings punish over-long screws.
- Compare the model code on the rear label with this page (G274QPF-QD) — same-series panels can differ.
Frequently asked questions
What VESA pattern does the MSI G274QPF-QD use?
The MSI G274QPF-QD uses a 75×75 mm VESA pattern — 75 mm between hole centers horizontally and 75 mm vertically. Any monitor arm, stand or wall bracket listing 75×75 mm fits directly. Confirm on the back of your unit, since some retail variants of a series differ.
What screws does the G274QPF-QD need for an arm or mount?
The G274QPF-QD takes M4 metric screws. Documented spec: MSI user guide specifies VESA plate 75 x 75 mm with M4 x 10 mm screws (4 mm thread diameter, 0.7 mm pitch, 10 mm length).. Most arms ship M4 hardware in two lengths — hand-test the shorter one first; a bolt that bottoms out can damage the housing.
How much does the G274QPF-QD weigh without the stand?
The G274QPF-QD weighs 8.9 lb (4.1 kg) without the stand. Typical desk arms list roughly 9–20 lb per screen, so check your arm's exact rating — and its supported screen-size range — against these numbers before buying.
Will a standard monitor arm hold the G274QPF-QD?
Any arm that lists the 75×75 mm pattern, carries at least 8.9 lb and covers 27-inch screens will hold it. The desk matters too: clamps need a solid edge; glass desks call for a grommet mount or freestanding base.
Can the G274QPF-QD be wall-mounted?
Yes — the same 75×75 mm holes work on wall brackets. 3 wall mount(s) in our database clear the G274QPF-QD's 8.9 lb and 27-inch size with a 20% margin; small fixed or articulating brackets sold for compact TVs are the usual pick.