Samsung CF791 (C34F791) VESA Mount Size & Fit
Quick answer
The Samsung CF791 (C34F791) uses a 100×100 mm VESA pattern (M4 screws). Screw spec: M4 metric thread. The CF791 (C34F791) weighs 13.4 lb (6.1 kg) without the stand, so any arm, stand or bracket rated for 100×100 mm and at least 13.4 lb will hold it. Verified against the Samsung documentation — see source below.
CF791 (C34F791) mounting specs
| VESA pattern | 100×100 mm (3.9×3.9 in) |
|---|---|
| Screw thread | M4 |
| Screw length | M4 metric thread; length depends on the arm plate — see the manual |
| Weight without stand | 13.4 lb (6.1 kg) |
| Screen size | 34 in (curved) |
| Model year | 2016 |
| Series | CF791 |
| Known aliases | LC34F791WQNXZA, CF791 |
| Source | Manufacturer documentation |
1500R curved ultrawide. Samsung's CF791 user manual ('Attaching the Wall-mount bracket', p.17) states 100 x 100 mm VESA screw holes with M4 standard screws, 4 EA; the manual copy was reached via a manual aggregator because Samsung's own spec page lists only 'Wall Mountable: Yes'. Weight with stand 16.8 lb.
Among the 4 verified 34-inch monitors here, the CF791 (C34F791) is #3 lightest of 4 at 13.4 lb — the range runs 11.2 to 13.8 lb.
Model-specific mounting notes
Curved panel
The CF791 (C34F791) is curved, so the area around its 100×100 mm holes is not a flat plane. Use an arm or bracket with a compact plate (most 75/100 mm plates qualify) and the spacers the manufacturer supplies, so the plate doesn't press on the curved housing.
Arm, stand or wall bracket for the CF791 (C34F791)
All three use the same 100×100 mm holes. A desk-clamp arm frees the footprint and adjusts in every axis; a freestanding VESA base replaces a wobbly factory stand; a wall bracket clears the desk but fixes the height. Whatever you pick, the rating must cover 13.4 lb — the full decision guide is VESA monitor mounts.
Wall mounts that fit the CF791 (C34F791)
From our mount database: pattern covers 100×100 mm, the rating clears the CF791 (C34F791)'s 13.4 lb with a 20% margin, and 34-inch screens are in range.
WALI 1330LM Articulating 13-42
Small-TV arm for kitchens and offices; folds to 2.6 in from the wall.
Supports VESA 75×75 up to 200×200 mm and 44 lb — clears the CF791 (C34F791)'s 100×100 mm / 13.4 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the CF791 (C34F791)'s 100×100 mm / 13.4 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the CF791 (C34F791)'s 100×100 mm / 13.4 lb.
Wall: single stud OK
Double-check before buying
- Pop off any plastic caps and confirm 4 threaded holes at 100 mm across and 100 mm vertically, center-to-center.
- Check the M4 bolts seat by hand before torquing — thin monitor housings punish over-long screws.
- Compare the model code on the rear label with this page (CF791 (C34F791)) — same-series panels can differ.
Frequently asked questions
What VESA pattern does the Samsung CF791 (C34F791) use?
The Samsung CF791 (C34F791) uses a 100×100 mm VESA pattern — 100 mm between hole centers horizontally and 100 mm vertically. Any monitor arm, stand or wall bracket listing 100×100 mm fits directly. Confirm on the back of your unit, since some retail variants of a series differ.
What screws does the CF791 (C34F791) need for an arm or mount?
The CF791 (C34F791) takes M4 metric screws. Documented spec: M4 metric thread; length depends on the arm plate — see the manual. Most arms ship M4 hardware in two lengths — hand-test the shorter one first; a bolt that bottoms out can damage the housing.
How much does the CF791 (C34F791) weigh without the stand?
The CF791 (C34F791) weighs 13.4 lb (6.1 kg) without the stand. Typical desk arms list roughly 9–20 lb per screen, so check your arm's exact rating — and its supported screen-size range — against these numbers before buying.
Will a standard monitor arm hold the CF791 (C34F791)?
Any arm that lists the 100×100 mm pattern, carries at least 13.4 lb and covers 34-inch screens will hold it — for this curved panel, prefer arms with a compact plate and use the supplied spacers or adapter hardware. The desk matters too: clamps need a solid edge; glass desks call for a grommet mount or freestanding base.
Can the CF791 (C34F791) be wall-mounted?
Yes — the same 100×100 mm holes work on wall brackets. 3 wall mount(s) in our database clear the CF791 (C34F791)'s 13.4 lb and 34-inch size with a 20% margin; small fixed or articulating brackets sold for compact TVs are the usual pick.