Samsung ViewFinity S8 (S32B804) VESA Mount Size & Fit
Quick answer
The Samsung ViewFinity S8 (S32B804) uses a 100×100 mm VESA pattern (M4 screws). Screw spec: M4 metric thread. The ViewFinity S8 (S32B804) weighs 12.1 lb (5.5 kg) without the stand, so any arm, stand or bracket rated for 100×100 mm and at least 12.1 lb will hold it. Verified against the Samsung documentation — see source below.
ViewFinity S8 (S32B804) mounting specs
| VESA pattern | 100×100 mm (3.9×3.9 in) |
|---|---|
| Screw thread | M4 |
| Screw length | M4 metric thread; length depends on the arm plate — see the manual |
| Weight without stand | 12.1 lb (5.5 kg) |
| Screen size | 32 in |
| Model year | 2022 |
| Series | ViewFinity S8 (S80PB) |
| Known aliases | LS32B804PXNXGO, S80PB, ViewFinity S8 32 |
| Source | Manufacturer documentation |
Flat 32-inch 4K USB-C monitor. M4 per FDMI MIS-D; Samsung spec page does not print the thread. Weight with stand 17.9 lb. Documented variant is the S80PB retail SKU LS32B804PXNXGO (the target 'S32B80x / S80B' family); specs for the S80B (LS32B800) sibling may differ slightly.
Among the 4 verified 32-inch monitors here, the ViewFinity S8 (S32B804) is the lightest at 12.1 lb — the range runs 12.1 to 16.3 lb.
Arm, stand or wall bracket for the ViewFinity S8 (S32B804)
All three use the same 100×100 mm holes. A desk-clamp arm frees the footprint and adjusts in every axis; a freestanding VESA base replaces a wobbly factory stand; a wall bracket clears the desk but fixes the height. Whatever you pick, the rating must cover 12.1 lb — the full decision guide is VESA monitor mounts.
Wall mounts that fit the ViewFinity S8 (S32B804)
From our mount database: pattern covers 100×100 mm, the rating clears the ViewFinity S8 (S32B804)'s 12.1 lb with a 20% margin, and 32-inch screens are in range.
WALI 1330LM Articulating 13-42
Small-TV arm for kitchens and offices; folds to 2.6 in from the wall.
Supports VESA 75×75 up to 200×200 mm and 44 lb — clears the ViewFinity S8 (S32B804)'s 100×100 mm / 12.1 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the ViewFinity S8 (S32B804)'s 100×100 mm / 12.1 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the ViewFinity S8 (S32B804)'s 100×100 mm / 12.1 lb.
Wall: single stud OK
Double-check before buying
- Pop off any plastic caps and confirm 4 threaded holes at 100 mm across and 100 mm vertically, center-to-center.
- Check the M4 bolts seat by hand before torquing — thin monitor housings punish over-long screws.
- Compare the model code on the rear label with this page (ViewFinity S8 (S32B804)) — same-series panels can differ.
Frequently asked questions
What VESA pattern does the Samsung ViewFinity S8 (S32B804) use?
The Samsung ViewFinity S8 (S32B804) uses a 100×100 mm VESA pattern — 100 mm between hole centers horizontally and 100 mm vertically. Any monitor arm, stand or wall bracket listing 100×100 mm fits directly. Confirm on the back of your unit, since some retail variants of a series differ.
What screws does the ViewFinity S8 (S32B804) need for an arm or mount?
The ViewFinity S8 (S32B804) takes M4 metric screws. Documented spec: M4 metric thread; length depends on the arm plate — see the manual. Most arms ship M4 hardware in two lengths — hand-test the shorter one first; a bolt that bottoms out can damage the housing.
How much does the ViewFinity S8 (S32B804) weigh without the stand?
The ViewFinity S8 (S32B804) weighs 12.1 lb (5.5 kg) without the stand. Typical desk arms list roughly 9–20 lb per screen, so check your arm's exact rating — and its supported screen-size range — against these numbers before buying.
Will a standard monitor arm hold the ViewFinity S8 (S32B804)?
Any arm that lists the 100×100 mm pattern, carries at least 12.1 lb and covers 32-inch screens will hold it. The desk matters too: clamps need a solid edge; glass desks call for a grommet mount or freestanding base.
Can the ViewFinity S8 (S32B804) be wall-mounted?
Yes — the same 100×100 mm holes work on wall brackets. 3 wall mount(s) in our database clear the ViewFinity S8 (S32B804)'s 12.1 lb and 32-inch size with a 20% margin; small fixed or articulating brackets sold for compact TVs are the usual pick.