Insignia NS-43F301NA22 VESA Size & Mount Fit
Quick answer
The Insignia NS-43F301NA22 uses a 200×200 mm VESA pattern (M6 screws). Screw spec: M6, 10-12 mm. The NS-43F301NA22 weighs 17 lb (7.7 kg) without the stand. Any mount rated for VESA 200×200 or larger and at least 25 lb will fit the NS-43F301NA22. Verified against the Insignia documentation — see source below.
NS-43F301NA22 mounting specs
The 43 in has its own Quick Setup Guide (doc 23-0783): 200x200 with M6 x 10-12 mm - notably shorter screws than the 16-24 mm of the 50/55 in F30 sizes. Weight per the archived Insignia spec page (SKU 6448758): 17 lb without stand (17.2 lb with), feet 36.36 in apart.
Weight vs. required mount rating
Among the 10 verified 43-inch TVs in our database, the NS-43F301NA22 is #7 lightest of 10 at 17 lb — the 43-inch range here runs 13.7 to 22.3 lb. Within Insignia, the NS-55F301NA22, NS-50F301NA22 share the NS-43F301NA22's 200×200 mm pattern.
Mounts that fit the NS-43F301NA22
Filtered from our mount database: pattern covers 200×200 mm, rating is at least 25 lb (20% margin over the NS-43F301NA22's 17 lb), and the 43-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the NS-43F301NA22's 200×200 mm / 17 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the NS-43F301NA22's 200×200 mm / 17 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the NS-43F301NA22's 200×200 mm / 17 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the NS-43F301NA22's 200×200 mm / 17 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mount-It! MI-305 Slim Fixed (200x200 max)
Wafer-thin fixed mount for TVs with compact hole patterns up to 200x200 mm.
Supports VESA 75×75 up to 200×200 mm and 88 lb — clears the NS-43F301NA22's 200×200 mm / 17 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the NS-43F301NA22
The NS-43F301NA22 takes M6 bolts: M6, 10-12 mm depending on the wall mount, per the 43 in Quick Setup Guide - shorter than the 50/55 in F30 spec. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the NS-43F301NA22 on furniture instead?
The NS-43F301NA22's legs span 36.4 in — it fits consoles at least 39 in wide, so both feet sit fully on the surface with a safety margin.
Furniture narrower than 39 in? A universal pedestal stand bolts into the same 200×200 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the NS-43F301NA22's 17 lb.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 200 mm across and 200 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (NS-43F301NA22) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the NS-43F301NA22: 200×200 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Insignia NS-43F301NA22 use?
The Insignia NS-43F301NA22 uses a 200×200 mm VESA pattern — 200 mm between hole centers horizontally and 200 mm vertically (about 7.9×7.9 in). Any bracket whose supported range covers 200×200 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the NS-43F301NA22 need for wall mounting?
The NS-43F301NA22 takes M6 metric screws. Documented length: M6, 10-12 mm depending on the wall mount, per the 43 in Quick Setup Guide - shorter than the 50/55 in F30 spec. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the NS-43F301NA22 with a hand-tightened test screw before torquing anything down.
How much does the NS-43F301NA22 weigh without the stand?
The NS-43F301NA22 weighs 17 lb (7.7 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 25 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the NS-43F301NA22?
A bracket sold as 400×400-only will not line up with the NS-43F301NA22's 200×200 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 200×200 mm, it fits directly. If not, a VESA adapter plate (200×200→400×400) bridges the difference; see our adapter guide.
How far apart are the legs on the NS-43F301NA22?
The NS-43F301NA22's feet span about 36.4 in across the outside edges. A console at least 39 in wide lets both feet sit fully on the surface. Narrower furniture calls for a pedestal stand that bolts into the 200×200 mm VESA holes.
Can the NS-43F301NA22 be mounted on a full-motion bracket?
Yes. At 17 lb, the NS-43F301NA22 is within range of full-motion arms rated 25 lb or higher — 4 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.