Hisense 65U8K VESA Size & Mount Fit
Quick answer
The Hisense 65U8K uses a 400×400 mm VESA pattern (M6 screws). Screw spec: M6. The 65U8K weighs 56.4 lb (25.6 kg) without the stand. Any mount rated for VESA 400×400 or larger and at least 75 lb will fit the 65U8K. Verified against the Hisense documentation — see source below.
65U8K mounting specs
| VESA pattern | 400×400 mm (15.7×15.7 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 per Hisense's sibling A6H/U6K sheets - the U8K sheet states no thread at all; confirm in the manual before buying bolts |
| Weight without stand | 56.4 lb (25.6 kg) |
| Stand footprint (W×D) | 44.3 × 12.6 in — feet at their widest position |
| Screen size | 65 in |
| Model year | 2023 |
| Series | U8K Mini-LED ULED |
| Known aliases | 65U8K |
| Source | Manufacturer documentation |
Square 400x400 (unlike the 65U6K's 400x300) and 56.4 lb - the heaviest Hisense here; two-stud mounting per your mount's manual. The sheet documents two stand positions: 44.3 in wide or 31.4 in narrow.
Among the 21 verified 65-inch TVs in our database, the 65U8K is the heaviest at 56.4 lb — the 65-inch range here runs 30.9 to 56.4 lb. The 65U8K is the only verified Hisense model here on the 400×400 mm pattern — the rest are listed in the Hisense hub.
Mounts that fit the 65U8K
Filtered from our mount database: pattern covers 400×400 mm, rating is at least 75 lb (20% margin over the 65U8K's 56.4 lb), and the 65-inch screen is within the listed range.
EchoGear EGLF2 Full Motion
Smooth dual-arm full motion with 22 in of extension for corner installs.
Supports VESA 100×100 up to 600×400 mm and 125 lb — clears the 65U8K's 400×400 mm / 56.4 lb.
Wall: 16-in dual stud required
EchoGear EGLT1 Tilting
Deep 15-degree tilt for bedroom and above-fireplace placements.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the 65U8K's 400×400 mm / 56.4 lb.
Wall: 16-in dual stud required
EchoGear EGLL1 Low-Profile Fixed
Ultra-low-profile fixed mount that keeps the TV about an inch off the wall.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the 65U8K's 400×400 mm / 56.4 lb.
Wall: 16-in dual stud required
Mount-It! MI-509B Ceiling
Ceiling mount for larger screens with tilt and telescoping height.
Supports VESA 100×100 up to 600×400 mm and 110 lb — clears the 65U8K's 400×400 mm / 56.4 lb.
Wall: lag-bolt into a ceiling joist per the manual
Pipishell PISF1 Fixed
Heavy-duty fixed plate for big panels; sits low and rigid.
Supports VESA 200×200 up to 600×400 mm and 132 lb — clears the 65U8K's 400×400 mm / 56.4 lb.
Wall: 16-in dual stud required
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the 65U8K
The 65U8K takes M6 bolts: M6 per Hisense's sibling A6H/U6K sheets - the U8K sheet states no thread at all; confirm in the manual before buying bolts. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the 65U8K on furniture instead?
The 65U8K's legs span 44.3 in at their widest position, each foot running 12.6 in front to back — it fits consoles at least 47 in wide and 15 in deep, so both feet sit fully on the surface with a safety margin.
Furniture narrower than 47 in? A universal pedestal stand bolts into the same 400×400 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the 65U8K's 56.4 lb.
Replacement remote for the 65U8K
Hisense U8K Voice Remote — part number ERF6N64H — is the matching remote for the 65U8K. Bluetooth voice remote with mic - pairing required. Consistently listed by replacement sellers for the 55-85 in U8K line; Hisense's own parts store carries no U8K remote listing to verify against.
Full compatibility list, substitutes and ordering advice: ERF6N64H remote page. Order by the part number, not the TV size — one remote covers the platform. All Hisense remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 400 mm across and 400 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (65U8K) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the 65U8K: 400×400 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Hisense 65U8K use?
The Hisense 65U8K uses a 400×400 mm VESA pattern — 400 mm between hole centers horizontally and 400 mm vertically (about 15.7×15.7 in). Any bracket whose supported range covers 400×400 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the 65U8K need for wall mounting?
The 65U8K takes M6 metric screws. Documented length: M6 per Hisense's sibling A6H/U6K sheets - the U8K sheet states no thread at all; confirm in the manual before buying bolts. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the 65U8K with a hand-tightened test screw before torquing anything down.
How much does the 65U8K weigh without the stand?
The 65U8K weighs 56.4 lb (25.6 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 75 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 600×400 mount fit the 65U8K?
A bracket sold as 600×400-only will not line up with the 65U8K's 400×400 mm holes. Most 600×400 mounts, however, support a range of patterns — if the spec sheet lists 400×400 mm, it fits directly. If not, a VESA adapter plate (400×400→600×400) bridges the difference; see our adapter guide.
How far apart are the legs on the 65U8K?
The 65U8K's feet at their widest position span about 44.3 in across the outside edges, with a front-to-back depth of 12.6 in. A console at least 47 in wide lets both feet sit fully on the surface (the manual also documents a narrower inner position). Narrower furniture calls for a pedestal stand that bolts into the 400×400 mm VESA holes.
What replacement remote works with the 65U8K?
Hisense U8K Voice Remote (part ERF6N64H) is the matching remote for the 65U8K. Bluetooth voice remote with mic - pairing required. Consistently listed by replacement sellers for the 55-85 in U8K line; Hisense's own parts store carries no U8K remote listing to verify against. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the 65U8K be mounted on a full-motion bracket?
Yes. At 56.4 lb, the 65U8K is within range of full-motion arms rated 75 lb or higher — 3 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.