Roku 24R2A5R VESA Size & Mount Fit
Quick answer
The Roku 24R2A5R uses a 100×100 mm VESA pattern (M4 screws). Screw spec: M4 x 5 mm. The 24R2A5R weighs 6 lb (2.7 kg) without the stand. Any mount rated for VESA 100×100 or larger and at least 10 lb will fit the 24R2A5R. Verified against the Roku documentation — see source below.
24R2A5R mounting specs
| VESA pattern | 100×100 mm (3.9×3.9 in) |
|---|---|
| Screw thread | M4 |
| Screw length | M4 x 5 mm per Roku's mount spec PDF - very short bolts; anything longer will bottom out |
| Weight without stand | 6 lb (2.7 kg) |
| Screen size | 24 in |
| Model year | 2023 |
| Series | Select Series HD |
| Known aliases | 24R2A5R |
| Source | Manufacturer documentation |
Tiny 100x100 pattern and 6 lb: fits monitor-class mounts, but respect the stubby 5 mm screw depth.
The 24R2A5R is currently the only verified 24-inch TV in our database, at 6 lb without the stand. The 24R2A5R is the only verified Roku model here on the 100×100 mm pattern — the rest are listed in the Roku hub.
Mounts that fit the 24R2A5R
Filtered from our mount database: pattern covers 100×100 mm, rating is at least 10 lb (20% margin over the 24R2A5R's 6 lb), and the 24-inch screen is within the listed range.
WALI 1330LM Articulating 13-42
Small-TV arm for kitchens and offices; folds to 2.6 in from the wall.
Supports VESA 75×75 up to 200×200 mm and 44 lb — clears the 24R2A5R's 100×100 mm / 6 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the 24R2A5R's 100×100 mm / 6 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the 24R2A5R's 100×100 mm / 6 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the 24R2A5R
The 24R2A5R takes M4 bolts: M4 x 5 mm per Roku's mount spec PDF - very short bolts; anything longer will bottom out. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Replacement remote for the 24R2A5R
Roku Voice Remote — part number RCA1R — is the matching remote for the 24R2A5R. Voice remote on AAA batteries (IR plus wireless). Roku's product pages state the Select Series boxed a Roku voice remote; the replacement Voice Remote (SKU RCA1R) works with all Roku TV models per roku.com. The budget Simple Remote RCC1R also works but drops voice.
Full compatibility list, substitutes and ordering advice: RCA1R remote page. Order by the part number, not the TV size — one remote covers the platform. All Roku remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 100 mm across and 100 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (24R2A5R) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the 24R2A5R: 100×100 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Roku 24R2A5R use?
The Roku 24R2A5R uses a 100×100 mm VESA pattern — 100 mm between hole centers horizontally and 100 mm vertically (about 3.9×3.9 in). Any bracket whose supported range covers 100×100 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the 24R2A5R need for wall mounting?
The 24R2A5R takes M4 metric screws. Documented length: M4 x 5 mm per Roku's mount spec PDF - very short bolts; anything longer will bottom out. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the 24R2A5R with a hand-tightened test screw before torquing anything down.
How much does the 24R2A5R weigh without the stand?
The 24R2A5R weighs 6 lb (2.7 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 10 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the 24R2A5R?
A bracket sold as 400×400-only will not line up with the 24R2A5R's 100×100 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 100×100 mm, it fits directly. If not, a VESA adapter plate (100×100→400×400) bridges the difference; see our adapter guide.
What replacement remote works with the 24R2A5R?
Roku Voice Remote (part RCA1R) is the matching remote for the 24R2A5R. Voice remote on AAA batteries (IR plus wireless). Roku's product pages state the Select Series boxed a Roku voice remote; the replacement Voice Remote (SKU RCA1R) works with all Roku TV models per roku.com. The budget Simple Remote RCC1R also works but drops voice. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the 24R2A5R be mounted on a full-motion bracket?
Yes. At 6 lb, the 24R2A5R is within range of full-motion arms rated 10 lb or higher — 1 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.