Roku 40R2A5R VESA Size & Mount Fit
Quick answer
The Roku 40R2A5R uses a 200×100 mm VESA pattern (M6 screws). Screw spec: M6 x 8 mm. The 40R2A5R weighs 11 lb (5 kg) without the stand. Any mount rated for VESA 200×100 or larger and at least 15 lb will fit the 40R2A5R. Verified against the Roku documentation — see source below.
40R2A5R mounting specs
| VESA pattern | 200×100 mm (7.9×3.9 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 x 8 mm per Roku's mount spec PDF |
| Weight without stand | 11 lb (5 kg) |
| Screen size | 40 in |
| Model year | 2023 |
| Series | Select Series HD |
| Known aliases | 40R2A5R |
| Source | Manufacturer documentation |
Same 200x100 rectangle as the 32 in Select but with M6 threads instead of M4 - don't reuse hardware between the two sizes.
The 40R2A5R is currently the only verified 40-inch TV in our database, at 11 lb without the stand. Within Roku, the 32R2A5R shares the 40R2A5R's 200×100 mm pattern.
Model-specific mounting notes
Non-square 200×100 mm pattern
The Roku 40R2A5R uses a 200×100 mm rectangle, not a square. Mounts sold as "200×200-only" won't line up vertically — a bracket for the Roku 40R2A5R must explicitly list 200×100 or cover it within its range.
Mounts that fit the 40R2A5R
Filtered from our mount database: pattern covers 200×100 mm, rating is at least 15 lb (20% margin over the 40R2A5R's 11 lb), and the 40-inch screen is within the listed range.
WALI 1330LM Articulating 13-42
Small-TV arm for kitchens and offices; folds to 2.6 in from the wall.
Supports VESA 75×75 up to 200×200 mm and 44 lb — clears the 40R2A5R's 200×100 mm / 11 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the 40R2A5R's 200×100 mm / 11 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the 40R2A5R's 200×100 mm / 11 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the 40R2A5R's 200×100 mm / 11 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mount-It! MI-305 Slim Fixed (200x200 max)
Wafer-thin fixed mount for TVs with compact hole patterns up to 200x200 mm.
Supports VESA 75×75 up to 200×200 mm and 88 lb — clears the 40R2A5R's 200×100 mm / 11 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the 40R2A5R
The 40R2A5R takes M6 bolts: M6 x 8 mm per Roku's mount spec PDF. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Replacement remote for the 40R2A5R
Roku Voice Remote — part number RCA1R — is the matching remote for the 40R2A5R. Voice remote on AAA batteries (IR plus wireless). Roku's product pages state the Select Series boxed a Roku voice remote; the replacement Voice Remote (SKU RCA1R) works with all Roku TV models per roku.com. The budget Simple Remote RCC1R also works but drops voice.
Full compatibility list, substitutes and ordering advice: RCA1R remote page. Order by the part number, not the TV size — one remote covers the platform. All Roku remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 200 mm across and 100 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (40R2A5R) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the 40R2A5R: 200×100 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Roku 40R2A5R use?
The Roku 40R2A5R uses a 200×100 mm VESA pattern — 200 mm between hole centers horizontally and 100 mm vertically (about 7.9×3.9 in). Any bracket whose supported range covers 200×100 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the 40R2A5R need for wall mounting?
The 40R2A5R takes M6 metric screws. Documented length: M6 x 8 mm per Roku's mount spec PDF. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the 40R2A5R with a hand-tightened test screw before torquing anything down.
How much does the 40R2A5R weigh without the stand?
The 40R2A5R weighs 11 lb (5 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 15 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the 40R2A5R?
A bracket sold as 400×400-only will not line up with the 40R2A5R's 200×100 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 200×100 mm, it fits directly. If not, a VESA adapter plate (200×100→400×400) bridges the difference; see our adapter guide.
What replacement remote works with the 40R2A5R?
Roku Voice Remote (part RCA1R) is the matching remote for the 40R2A5R. Voice remote on AAA batteries (IR plus wireless). Roku's product pages state the Select Series boxed a Roku voice remote; the replacement Voice Remote (SKU RCA1R) works with all Roku TV models per roku.com. The budget Simple Remote RCC1R also works but drops voice. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the 40R2A5R be mounted on a full-motion bracket?
Yes. At 11 lb, the 40R2A5R is within range of full-motion arms rated 15 lb or higher — 3 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.