LG 65UP7000PUA VESA Size & Mount Fit
Quick answer
The LG 65UP7000PUA uses a 400×300 mm VESA pattern (M6 screws). Screw spec: M6. The 65UP7000PUA weighs 37.9 lb (17.2 kg) without the stand. Any mount rated for VESA 400×300 or larger and at least 50 lb will fit the 65UP7000PUA. Verified against the LG documentation — see source below.
65UP7000PUA mounting specs
| VESA pattern | 400×300 mm (15.7×11.8 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 per the LG owner's manual - length not published |
| Weight without stand | 37.9 lb (17.2 kg) |
| Stand width | 46.5 in — stand footprint |
| Screen size | 65 in |
| Model year | 2021 |
| Series | UP7000 UHD |
| Known aliases | 65UP7000PUA.AUSQ |
| Source | Manufacturer documentation |
The only UP7000 size that moves to 400x300 - the 43-55 in siblings all use 300x300, so don't buy one bracket for a mixed pair.
Among the 21 verified 65-inch TVs in our database, the 65UP7000PUA is #7 lightest of 21 at 37.9 lb — the 65-inch range here runs 30.9 to 56.4 lb. The 65UP7000PUA is the only verified LG model here on the 400×300 mm pattern — the rest are listed in the LG hub.
Mounts that fit the 65UP7000PUA
Filtered from our mount database: pattern covers 400×300 mm, rating is at least 50 lb (20% margin over the 65UP7000PUA's 37.9 lb), and the 65-inch screen is within the listed range.
EchoGear EGLF2 Full Motion
Smooth dual-arm full motion with 22 in of extension for corner installs.
Supports VESA 100×100 up to 600×400 mm and 125 lb — clears the 65UP7000PUA's 400×300 mm / 37.9 lb.
Wall: 16-in dual stud required
EchoGear EGLT1 Tilting
Deep 15-degree tilt for bedroom and above-fireplace placements.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the 65UP7000PUA's 400×300 mm / 37.9 lb.
Wall: 16-in dual stud required
EchoGear EGLL1 Low-Profile Fixed
Ultra-low-profile fixed mount that keeps the TV about an inch off the wall.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the 65UP7000PUA's 400×300 mm / 37.9 lb.
Wall: 16-in dual stud required
Mount-It! MI-509B Ceiling
Ceiling mount for larger screens with tilt and telescoping height.
Supports VESA 100×100 up to 600×400 mm and 110 lb — clears the 65UP7000PUA's 400×300 mm / 37.9 lb.
Wall: lag-bolt into a ceiling joist per the manual
Pipishell PISF1 Fixed
Heavy-duty fixed plate for big panels; sits low and rigid.
Supports VESA 200×200 up to 600×400 mm and 132 lb — clears the 65UP7000PUA's 400×300 mm / 37.9 lb.
Wall: 16-in dual stud required
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the 65UP7000PUA
The 65UP7000PUA takes M6 bolts: M6 per the LG owner's manual - length not published. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the 65UP7000PUA on furniture instead?
Per LG's documentation, the 65UP7000PUA's factory stand is 46.5 in wide — plan a console at least 49 in wide. The panel can overhang the furniture; the stand cannot.
Furniture narrower than 49 in? A universal pedestal stand bolts into the same 400×300 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the 65UP7000PUA's 37.9 lb.
Replacement remote for the 65UP7000PUA
LG standard IR remote (2021 UHD) — part number AKB76037601 — is the matching remote for the 65UP7000PUA. Standard IR remote - no voice or pointer; 2 AAA batteries. The UP7000 ships with this standard remote (the Magic Remote AN-MR21GA works but is sold separately); LG-authorized parts stores sell AKB76037601 as the OEM part for 43-65UP7000PUA.
Full compatibility list, substitutes and ordering advice: AKB76037601 remote page. Order by the part number, not the TV size — one remote covers the platform. All LG remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 400 mm across and 300 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (65UP7000PUA) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the 65UP7000PUA: 400×300 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the LG 65UP7000PUA use?
The LG 65UP7000PUA uses a 400×300 mm VESA pattern — 400 mm between hole centers horizontally and 300 mm vertically (about 15.7×11.8 in). Any bracket whose supported range covers 400×300 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the 65UP7000PUA need for wall mounting?
The 65UP7000PUA takes M6 metric screws. Documented length: M6 per the LG owner's manual - length not published. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the 65UP7000PUA with a hand-tightened test screw before torquing anything down.
How much does the 65UP7000PUA weigh without the stand?
The 65UP7000PUA weighs 37.9 lb (17.2 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 50 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 600×400 mount fit the 65UP7000PUA?
A bracket sold as 600×400-only will not line up with the 65UP7000PUA's 400×300 mm holes. Most 600×400 mounts, however, support a range of patterns — if the spec sheet lists 400×300 mm, it fits directly. If not, a VESA adapter plate (400×300→600×400) bridges the difference; see our adapter guide.
How wide is the 65UP7000PUA's stand?
Per the manufacturer's documentation, the 65UP7000PUA's factory stand is about 46.5 in wide. Plan at least 49 in of flat, level surface: the panel can overhang the furniture, the stand cannot. If your console is narrower, a universal pedestal stand bolts into the 400×300 mm VESA holes instead.
What replacement remote works with the 65UP7000PUA?
LG standard IR remote (2021 UHD) (part AKB76037601) is the matching remote for the 65UP7000PUA. Standard IR remote - no voice or pointer; 2 AAA batteries. The UP7000 ships with this standard remote (the Magic Remote AN-MR21GA works but is sold separately); LG-authorized parts stores sell AKB76037601 as the OEM part for 43-65UP7000PUA. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the 65UP7000PUA be mounted on a full-motion bracket?
Yes. At 37.9 lb, the 65UP7000PUA is within range of full-motion arms rated 50 lb or higher — 3 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.