LG OLED55C3PUA VESA Size & Mount Fit
Quick answer
The LG OLED55C3PUA uses a 300×200 mm VESA pattern (M6 screws). Screw spec: M6. The OLED55C3PUA weighs 31.1 lb (14.1 kg) without the stand. Any mount rated for VESA 300×200 or larger and at least 40 lb will fit the OLED55C3PUA. Verified against the LG documentation — see source below.
OLED55C3PUA mounting specs
| VESA pattern | 300×200 mm (11.8×7.9 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 per the LG C3 owner's manual - length not published; hand-test before torquing |
| Weight without stand | 31.1 lb (14.1 kg) |
| Stand footprint (W×D) | 18.5 × 9.1 in — stand footprint |
| Screen size | 55 in |
| Model year | 2023 |
| Series | C3 evo OLED |
| Known aliases | OLED55C3PUA.AUS |
| Source | Manufacturer documentation |
Weight 14.1 kg per LG's product page. Panel is very thin at the top; the mount plate loads the lower half of the cabinet. LG's matching slim bracket is the OLW480B.
Among the 26 verified 55-inch TVs in our database, the OLED55C3PUA is #16 lightest of 26 at 31.1 lb — the 55-inch range here runs 22 to 41.7 lb. Within LG, the OLED55C2PUA, OLED65C2PUA, OLED42C2PUA share the OLED55C3PUA's 300×200 mm pattern.
Model-specific mounting notes
Bottom-offset hole pattern
The mounting holes on the LG OLED55C3PUA sit lower than the panel's center line, so the TV hangs higher than the bracket position suggests. Dry-fit and measure before drilling: place the bracket, hang the TV, then mark your final wall height.
Mounts that fit the OLED55C3PUA
Filtered from our mount database: pattern covers 300×200 mm, rating is at least 40 lb (20% margin over the OLED55C3PUA's 31.1 lb), and the 55-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the OLED55C3PUA's 300×200 mm / 31.1 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the OLED55C3PUA's 300×200 mm / 31.1 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the OLED55C3PUA's 300×200 mm / 31.1 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the OLED55C3PUA's 300×200 mm / 31.1 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mounting Dream MD2163-K Fixed
Budget fixed bracket for small and mid-size TVs with a bubble level included.
Supports VESA 75×75 up to 400×400 mm and 100 lb — clears the OLED55C3PUA's 300×200 mm / 31.1 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the OLED55C3PUA
The OLED55C3PUA takes M6 bolts: M6 per the LG C3 owner's manual - length not published; hand-test before torquing. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the OLED55C3PUA on furniture instead?
Per LG's documentation, the OLED55C3PUA's factory stand is 18.5 in wide and 9.1 in deep — plan a console at least 21 in wide and 12 in deep. The panel can overhang the furniture; the stand cannot.
Furniture narrower than 21 in? A universal pedestal stand bolts into the same 300×200 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the OLED55C3PUA's 31.1 lb.
Replacement remote for the OLED55C3PUA
LG Magic Remote (2023) — part number MR23GA — is the matching remote for the OLED55C3PUA. Bluetooth RF Magic Remote with voice and motion pointer (internal p/n AKB76043112). OEM dealer compatibility lists name OLED55/65/77/83C3PUA among 70+ 2023 LG models; the separately sold universal variant is the MR23GN.
Full compatibility list, substitutes and ordering advice: MR23GA remote page. Order by the part number, not the TV size — one remote covers the platform. All LG remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 300 mm across and 200 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (OLED55C3PUA) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the OLED55C3PUA: 300×200 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the LG OLED55C3PUA use?
The LG OLED55C3PUA uses a 300×200 mm VESA pattern — 300 mm between hole centers horizontally and 200 mm vertically (about 11.8×7.9 in). Any bracket whose supported range covers 300×200 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the OLED55C3PUA need for wall mounting?
The OLED55C3PUA takes M6 metric screws. Documented length: M6 per the LG C3 owner's manual - length not published; hand-test before torquing. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the OLED55C3PUA with a hand-tightened test screw before torquing anything down.
How much does the OLED55C3PUA weigh without the stand?
The OLED55C3PUA weighs 31.1 lb (14.1 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 40 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the OLED55C3PUA?
A bracket sold as 400×400-only will not line up with the OLED55C3PUA's 300×200 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 300×200 mm, it fits directly. If not, a VESA adapter plate (300×200→400×400) bridges the difference; see our adapter guide.
How wide is the OLED55C3PUA's stand?
Per the manufacturer's documentation, the OLED55C3PUA's factory stand is about 18.5 in wide and 9.1 in deep. Plan at least 21 in of flat, level surface: the panel can overhang the furniture, the stand cannot. If your console is narrower, a universal pedestal stand bolts into the 300×200 mm VESA holes instead.
What replacement remote works with the OLED55C3PUA?
LG Magic Remote (2023) (part MR23GA) is the matching remote for the OLED55C3PUA. Bluetooth RF Magic Remote with voice and motion pointer (internal p/n AKB76043112). OEM dealer compatibility lists name OLED55/65/77/83C3PUA among 70+ 2023 LG models; the separately sold universal variant is the MR23GN. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the OLED55C3PUA be mounted on a full-motion bracket?
Yes. At 31.1 lb, the OLED55C3PUA is within range of full-motion arms rated 40 lb or higher — 5 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.