LG OLED65C2PUA VESA Size & Mount Fit
Quick answer
The LG OLED65C2PUA uses a 300×200 mm VESA pattern (M6 screws). Screw spec: M6 - length not published by LG. The OLED65C2PUA weighs 32.6 lb (14.8 kg) without the stand. Any mount rated for VESA 300×200 or larger and at least 45 lb will fit the OLED65C2PUA. Verified against the LG documentation — see source below.
OLED65C2PUA mounting specs
| VESA pattern | 300×200 mm (11.8×7.9 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 - length not published by LG; hand-test with the mount's shortest M6 bolts and do not force |
| Weight without stand | 32.6 lb (14.8 kg) |
| Stand width | 17.7 in — stand footprint |
| Screen size | 65 in |
| Model year | 2022 |
| Series | C2 evo OLED |
| Known aliases | OLED65C2AUA |
| Source | Manufacturer documentation |
Per LG's C2PUA series spec sheet: 32.6 lb without stand, 37 lb with stand.
Among the 21 verified 65-inch TVs in our database, the OLED65C2PUA is #2 lightest of 21 at 32.6 lb — the 65-inch range here runs 30.9 to 56.4 lb. Within LG, the OLED55C2PUA, OLED42C2PUA, OLED48C2PUA share the OLED65C2PUA's 300×200 mm pattern.
Model-specific mounting notes
Bottom-offset hole pattern
The mounting holes on the LG OLED65C2PUA sit lower than the panel's center line, so the TV hangs higher than the bracket position suggests. Dry-fit and measure before drilling: place the bracket, hang the TV, then mark your final wall height.
Mounts that fit the OLED65C2PUA
Filtered from our mount database: pattern covers 300×200 mm, rating is at least 45 lb (20% margin over the OLED65C2PUA's 32.6 lb), and the 65-inch screen is within the listed range.
EchoGear EGLF2 Full Motion
Smooth dual-arm full motion with 22 in of extension for corner installs.
Supports VESA 100×100 up to 600×400 mm and 125 lb — clears the OLED65C2PUA's 300×200 mm / 32.6 lb.
Wall: 16-in dual stud required
EchoGear EGLT1 Tilting
Deep 15-degree tilt for bedroom and above-fireplace placements.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the OLED65C2PUA's 300×200 mm / 32.6 lb.
Wall: 16-in dual stud required
EchoGear EGLL1 Low-Profile Fixed
Ultra-low-profile fixed mount that keeps the TV about an inch off the wall.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the OLED65C2PUA's 300×200 mm / 32.6 lb.
Wall: 16-in dual stud required
Mount-It! MI-509B Ceiling
Ceiling mount for larger screens with tilt and telescoping height.
Supports VESA 100×100 up to 600×400 mm and 110 lb — clears the OLED65C2PUA's 300×200 mm / 32.6 lb.
Wall: lag-bolt into a ceiling joist per the manual
Pipishell PISF1 Fixed
Heavy-duty fixed plate for big panels; sits low and rigid.
Supports VESA 200×200 up to 600×400 mm and 132 lb — clears the OLED65C2PUA's 300×200 mm / 32.6 lb.
Wall: 16-in dual stud required
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the OLED65C2PUA
The OLED65C2PUA takes M6 bolts: M6 - length not published by LG; hand-test with the mount's shortest M6 bolts and do not force. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the OLED65C2PUA on furniture instead?
Per LG's documentation, the OLED65C2PUA's factory stand is 17.7 in wide — plan a console at least 20 in wide. The panel can overhang the furniture; the stand cannot.
Furniture narrower than 20 in? A universal pedestal stand bolts into the same 300×200 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the OLED65C2PUA's 32.6 lb.
Replacement remote for the OLED65C2PUA
LG Magic Remote (2022) — part number AN-MR22GA — is the matching remote for the OLED65C2PUA. Bluetooth RF Magic Remote with voice and motion pointer. LG's 2022 Magic Remote guide confirms p/n AKB76039902; dealer compatibility lists name the C2 B2 and A2 OLED models explicitly.
Full compatibility list, substitutes and ordering advice: AN-MR22GA remote page. Order by the part number, not the TV size — one remote covers the platform. All LG remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 300 mm across and 200 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (OLED65C2PUA) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the OLED65C2PUA: 300×200 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the LG OLED65C2PUA use?
The LG OLED65C2PUA uses a 300×200 mm VESA pattern — 300 mm between hole centers horizontally and 200 mm vertically (about 11.8×7.9 in). Any bracket whose supported range covers 300×200 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the OLED65C2PUA need for wall mounting?
The OLED65C2PUA takes M6 metric screws. Documented length: M6 - length not published by LG; hand-test with the mount's shortest M6 bolts and do not force. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the OLED65C2PUA with a hand-tightened test screw before torquing anything down.
How much does the OLED65C2PUA weigh without the stand?
The OLED65C2PUA weighs 32.6 lb (14.8 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 45 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the OLED65C2PUA?
A bracket sold as 400×400-only will not line up with the OLED65C2PUA's 300×200 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 300×200 mm, it fits directly. If not, a VESA adapter plate (300×200→400×400) bridges the difference; see our adapter guide.
How wide is the OLED65C2PUA's stand?
Per the manufacturer's documentation, the OLED65C2PUA's factory stand is about 17.7 in wide. Plan at least 20 in of flat, level surface: the panel can overhang the furniture, the stand cannot. If your console is narrower, a universal pedestal stand bolts into the 300×200 mm VESA holes instead.
What replacement remote works with the OLED65C2PUA?
LG Magic Remote (2022) (part AN-MR22GA) is the matching remote for the OLED65C2PUA. Bluetooth RF Magic Remote with voice and motion pointer. LG's 2022 Magic Remote guide confirms p/n AKB76039902; dealer compatibility lists name the C2 B2 and A2 OLED models explicitly. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the OLED65C2PUA be mounted on a full-motion bracket?
Yes. At 32.6 lb, the OLED65C2PUA is within range of full-motion arms rated 45 lb or higher — 3 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.