LG OLED48C1PUB VESA Size & Mount Fit
Quick answer
The LG OLED48C1PUB uses a 300×200 mm VESA pattern (M6 screws). Screw spec: M6 - length not published by LG. The OLED48C1PUB weighs 32.8 lb (14.9 kg) without the stand. Any mount rated for VESA 300×200 or larger and at least 45 lb will fit the OLED48C1PUB. Verified against the LG documentation — see source below.
OLED48C1PUB mounting specs
| VESA pattern | 300×200 mm (11.8×7.9 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 - length not published by LG; hand-test with the mount's shortest M6 bolts and do not force |
| Weight without stand | 32.8 lb (14.9 kg) |
| Stand width | 33 in — stand footprint |
| Screen size | 48 in |
| Model year | 2021 |
| Series | C1 OLED |
| Known aliases | OLED48C1AUB |
| Source | Manufacturer documentation |
Per LG's C1PUA/PUB series sheet; identical mounting numbers to the 48 in C2 that replaced it, so brackets carry over between generations.
Among the 2 verified 48-inch TVs in our database, the OLED48C1PUB is the heaviest at 32.8 lb — the 48-inch range here runs 32.8 to 32.8 lb. Within LG, the OLED55C2PUA, OLED65C2PUA, OLED42C2PUA share the OLED48C1PUB's 300×200 mm pattern.
Mounts that fit the OLED48C1PUB
Filtered from our mount database: pattern covers 300×200 mm, rating is at least 45 lb (20% margin over the OLED48C1PUB's 32.8 lb), and the 48-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the OLED48C1PUB's 300×200 mm / 32.8 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the OLED48C1PUB's 300×200 mm / 32.8 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the OLED48C1PUB's 300×200 mm / 32.8 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the OLED48C1PUB's 300×200 mm / 32.8 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mounting Dream MD2163-K Fixed
Budget fixed bracket for small and mid-size TVs with a bubble level included.
Supports VESA 75×75 up to 400×400 mm and 100 lb — clears the OLED48C1PUB's 300×200 mm / 32.8 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the OLED48C1PUB
The OLED48C1PUB takes M6 bolts: M6 - length not published by LG; hand-test with the mount's shortest M6 bolts and do not force. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the OLED48C1PUB on furniture instead?
Per LG's documentation, the OLED48C1PUB's factory stand is 33 in wide — plan a console at least 35 in wide. The panel can overhang the furniture; the stand cannot.
Furniture narrower than 35 in? A universal pedestal stand bolts into the same 300×200 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the OLED48C1PUB's 32.8 lb.
Replacement remote for the OLED48C1PUB
LG Magic Remote (2021) — part number AN-MR21GA — is the matching remote for the OLED48C1PUB. Bluetooth RF Magic Remote with voice mic and motion pointer; 2 AA batteries. LG's own 2021 Magic Remote guide (p/n AGF30136002) covers the whole 2021 lineup - C1/G1/A1/B1 OLED plus QNED/NANO/UP75/UP80.
Full compatibility list, substitutes and ordering advice: AN-MR21GA remote page. Order by the part number, not the TV size — one remote covers the platform. All LG remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 300 mm across and 200 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (OLED48C1PUB) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the OLED48C1PUB: 300×200 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the LG OLED48C1PUB use?
The LG OLED48C1PUB uses a 300×200 mm VESA pattern — 300 mm between hole centers horizontally and 200 mm vertically (about 11.8×7.9 in). Any bracket whose supported range covers 300×200 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the OLED48C1PUB need for wall mounting?
The OLED48C1PUB takes M6 metric screws. Documented length: M6 - length not published by LG; hand-test with the mount's shortest M6 bolts and do not force. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the OLED48C1PUB with a hand-tightened test screw before torquing anything down.
How much does the OLED48C1PUB weigh without the stand?
The OLED48C1PUB weighs 32.8 lb (14.9 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 45 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the OLED48C1PUB?
A bracket sold as 400×400-only will not line up with the OLED48C1PUB's 300×200 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 300×200 mm, it fits directly. If not, a VESA adapter plate (300×200→400×400) bridges the difference; see our adapter guide.
How wide is the OLED48C1PUB's stand?
Per the manufacturer's documentation, the OLED48C1PUB's factory stand is about 33 in wide. Plan at least 35 in of flat, level surface: the panel can overhang the furniture, the stand cannot. If your console is narrower, a universal pedestal stand bolts into the 300×200 mm VESA holes instead.
What replacement remote works with the OLED48C1PUB?
LG Magic Remote (2021) (part AN-MR21GA) is the matching remote for the OLED48C1PUB. Bluetooth RF Magic Remote with voice mic and motion pointer; 2 AA batteries. LG's own 2021 Magic Remote guide (p/n AGF30136002) covers the whole 2021 lineup - C1/G1/A1/B1 OLED plus QNED/NANO/UP75/UP80. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the OLED48C1PUB be mounted on a full-motion bracket?
Yes. At 32.8 lb, the OLED48C1PUB is within range of full-motion arms rated 45 lb or higher — 5 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.