Roku 75R4A5R VESA Size & Mount Fit
Quick answer
The Roku 75R4A5R uses a 400×300 mm VESA pattern (M6 screws). Screw spec: M6 x 16 mm. The 75R4A5R weighs 50 lb (22.7 kg) without the stand. Any mount rated for VESA 400×300 or larger and at least 65 lb will fit the 75R4A5R. Verified against the Roku documentation — see source below.
75R4A5R mounting specs
| VESA pattern | 400×300 mm (15.7×11.8 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 x 16 mm per Roku's official mount specification PDF |
| Weight without stand | 50 lb (22.7 kg) |
| Screen size | 75 in |
| Model year | 2023 |
| Series | Select Series 4K |
| Known aliases | 75R4A5R |
| Source | Manufacturer documentation |
Roku's biggest Select: 50 lb approximate on a 400x300 pattern - budget a 65 lb-plus mount rating and a two-stud install.
Among the 5 verified 75-inch TVs in our database, the 75R4A5R is the lightest at 50 lb — the 75-inch range here runs 50 to 71 lb. Within Roku, the 50R4A5R, 55R4A5R, 65R4A5R share the 75R4A5R's 400×300 mm pattern.
Mounts that fit the 75R4A5R
Filtered from our mount database: pattern covers 400×300 mm, rating is at least 65 lb (20% margin over the 75R4A5R's 50 lb), and the 75-inch screen is within the listed range.
EchoGear EGLF2 Full Motion
Smooth dual-arm full motion with 22 in of extension for corner installs.
Supports VESA 100×100 up to 600×400 mm and 125 lb — clears the 75R4A5R's 400×300 mm / 50 lb.
Wall: 16-in dual stud required
EchoGear EGLT1 Tilting
Deep 15-degree tilt for bedroom and above-fireplace placements.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the 75R4A5R's 400×300 mm / 50 lb.
Wall: 16-in dual stud required
EchoGear EGLL1 Low-Profile Fixed
Ultra-low-profile fixed mount that keeps the TV about an inch off the wall.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the 75R4A5R's 400×300 mm / 50 lb.
Wall: 16-in dual stud required
Pipishell PISF1 Fixed
Heavy-duty fixed plate for big panels; sits low and rigid.
Supports VESA 200×200 up to 600×400 mm and 132 lb — clears the 75R4A5R's 400×300 mm / 50 lb.
Wall: 16-in dual stud required
Mounting Dream MD2296 Full Motion
Dual-arm articulating mount for large panels; swivels 45 degrees each way.
Supports VESA 200×200 up to 600×400 mm and 132 lb — clears the 75R4A5R's 400×300 mm / 50 lb.
Wall: 16-in dual stud required
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the 75R4A5R
The 75R4A5R takes M6 bolts: M6 x 16 mm per Roku's official mount specification PDF. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Replacement remote for the 75R4A5R
Roku Voice Remote — part number RCA1R — is the matching remote for the 75R4A5R. Voice remote on AAA batteries (IR plus wireless). Roku's product pages state the Select Series boxed a Roku voice remote; the replacement Voice Remote (SKU RCA1R) works with all Roku TV models per roku.com. The budget Simple Remote RCC1R also works but drops voice.
Full compatibility list, substitutes and ordering advice: RCA1R remote page. Order by the part number, not the TV size — one remote covers the platform. All Roku remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 400 mm across and 300 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (75R4A5R) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the 75R4A5R: 400×300 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Roku 75R4A5R use?
The Roku 75R4A5R uses a 400×300 mm VESA pattern — 400 mm between hole centers horizontally and 300 mm vertically (about 15.7×11.8 in). Any bracket whose supported range covers 400×300 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the 75R4A5R need for wall mounting?
The 75R4A5R takes M6 metric screws. Documented length: M6 x 16 mm per Roku's official mount specification PDF. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the 75R4A5R with a hand-tightened test screw before torquing anything down.
How much does the 75R4A5R weigh without the stand?
The 75R4A5R weighs 50 lb (22.7 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 65 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 600×400 mount fit the 75R4A5R?
A bracket sold as 600×400-only will not line up with the 75R4A5R's 400×300 mm holes. Most 600×400 mounts, however, support a range of patterns — if the spec sheet lists 400×300 mm, it fits directly. If not, a VESA adapter plate (400×300→600×400) bridges the difference; see our adapter guide.
What replacement remote works with the 75R4A5R?
Roku Voice Remote (part RCA1R) is the matching remote for the 75R4A5R. Voice remote on AAA batteries (IR plus wireless). Roku's product pages state the Select Series boxed a Roku voice remote; the replacement Voice Remote (SKU RCA1R) works with all Roku TV models per roku.com. The budget Simple Remote RCC1R also works but drops voice. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the 75R4A5R be mounted on a full-motion bracket?
Yes. At 50 lb, the 75R4A5R is within range of full-motion arms rated 65 lb or higher — 3 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.