Samsung UN65CU7000 VESA Size & Mount Fit
Quick answer
The Samsung UN65CU7000 uses a 400×300 mm VESA pattern (M8 screws). Screw spec: M8. The UN65CU7000 weighs 45.4 lb (20.6 kg) without the stand. Any mount rated for VESA 400×300 or larger and at least 60 lb will fit the UN65CU7000. Verified against the Samsung documentation — see source below.
UN65CU7000 mounting specs
| VESA pattern | 400×300 mm (15.7×11.8 in) |
|---|---|
| Screw thread | M8 |
| Screw length | M8 per Samsung owner's manuals (thread not stated on this spec sheet); hand-test length - 2023 hole depths are not published |
| Weight without stand | 45.4 lb (20.6 kg) |
| Screen size | 65 in |
| Model year | 2023 |
| Series | CU7000 Crystal UHD |
| Known aliases | UN65CU7000FXZA |
| Source | Manufacturer documentation |
2023 refresh of the long-running 65 in budget chassis: 400x300 and 45.4 lb, matching the TU7000/TU8000 generation to the decimal.
Among the 21 verified 65-inch TVs in our database, the UN65CU7000 is #12 lightest of 21 at 45.4 lb — the 65-inch range here runs 30.9 to 56.4 lb. Within Samsung, the UN65TU7000, UN58TU7000, UN70TU7000 share the UN65CU7000's 400×300 mm pattern.
Mounts that fit the UN65CU7000
Filtered from our mount database: pattern covers 400×300 mm, rating is at least 60 lb (20% margin over the UN65CU7000's 45.4 lb), and the 65-inch screen is within the listed range.
EchoGear EGLF2 Full Motion
Smooth dual-arm full motion with 22 in of extension for corner installs.
Supports VESA 100×100 up to 600×400 mm and 125 lb — clears the UN65CU7000's 400×300 mm / 45.4 lb.
Wall: 16-in dual stud required
EchoGear EGLT1 Tilting
Deep 15-degree tilt for bedroom and above-fireplace placements.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the UN65CU7000's 400×300 mm / 45.4 lb.
Wall: 16-in dual stud required
EchoGear EGLL1 Low-Profile Fixed
Ultra-low-profile fixed mount that keeps the TV about an inch off the wall.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the UN65CU7000's 400×300 mm / 45.4 lb.
Wall: 16-in dual stud required
Mount-It! MI-509B Ceiling
Ceiling mount for larger screens with tilt and telescoping height.
Supports VESA 100×100 up to 600×400 mm and 110 lb — clears the UN65CU7000's 400×300 mm / 45.4 lb.
Wall: lag-bolt into a ceiling joist per the manual
Pipishell PISF1 Fixed
Heavy-duty fixed plate for big panels; sits low and rigid.
Supports VESA 200×200 up to 600×400 mm and 132 lb — clears the UN65CU7000's 400×300 mm / 45.4 lb.
Wall: 16-in dual stud required
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the UN65CU7000
The UN65CU7000 takes M8 bolts: M8 per Samsung owner's manuals (thread not stated on this spec sheet); hand-test length - 2023 hole depths are not published. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Replacement remote for the UN65CU7000
Samsung Remote Control (TM2240A) — part number BN59-01388A — is the matching remote for the UN65CU7000. IR-only non-voice remote on 2 AAA batteries. Sold as new OEM stock explicitly for the whole US CU7000 series (43-85 in); the solar BN59-01386A voice remote is a compatible upgrade rather than the shipped part.
Full compatibility list, substitutes and ordering advice: BN59-01388A remote page. Order by the part number, not the TV size — one remote covers the platform. All Samsung remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 400 mm across and 300 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (UN65CU7000) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the UN65CU7000: 400×300 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Samsung UN65CU7000 use?
The Samsung UN65CU7000 uses a 400×300 mm VESA pattern — 400 mm between hole centers horizontally and 300 mm vertically (about 15.7×11.8 in). Any bracket whose supported range covers 400×300 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the UN65CU7000 need for wall mounting?
The UN65CU7000 takes M8 metric screws. Documented length: M8 per Samsung owner's manuals (thread not stated on this spec sheet); hand-test length - 2023 hole depths are not published. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the UN65CU7000 with a hand-tightened test screw before torquing anything down.
How much does the UN65CU7000 weigh without the stand?
The UN65CU7000 weighs 45.4 lb (20.6 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 60 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 600×400 mount fit the UN65CU7000?
A bracket sold as 600×400-only will not line up with the UN65CU7000's 400×300 mm holes. Most 600×400 mounts, however, support a range of patterns — if the spec sheet lists 400×300 mm, it fits directly. If not, a VESA adapter plate (400×300→600×400) bridges the difference; see our adapter guide.
What replacement remote works with the UN65CU7000?
Samsung Remote Control (TM2240A) (part BN59-01388A) is the matching remote for the UN65CU7000. IR-only non-voice remote on 2 AAA batteries. Sold as new OEM stock explicitly for the whole US CU7000 series (43-85 in); the solar BN59-01386A voice remote is a compatible upgrade rather than the shipped part. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the UN65CU7000 be mounted on a full-motion bracket?
Yes. At 45.4 lb, the UN65CU7000 is within range of full-motion arms rated 60 lb or higher — 3 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.