Samsung UN55TU7000 VESA Size & Mount Fit
Quick answer
The Samsung UN55TU7000 uses a 200×200 mm VESA pattern (M8 screws). Screw spec: M8 x 20-22 mm. The UN55TU7000 weighs 30.6 lb (13.9 kg) without the stand. Any mount rated for VESA 200×200 or larger and at least 40 lb will fit the UN55TU7000. Verified against the Samsung documentation — see source below.
UN55TU7000 mounting specs
| VESA pattern | 200×200 mm (7.9×7.9 in) |
|---|---|
| Screw thread | M8 |
| Screw length | M8 x 20-22 mm per Samsung's 2020 TV mounting guide |
| Weight without stand | 30.6 lb (13.9 kg) |
| Screen size | 55 in |
| Model year | 2020 |
| Series | TU7000 Crystal UHD |
| Known aliases | UN55TU7000FXZA |
| Source | Manufacturer documentation |
200x200 despite the 55 in size - Samsung groups 43-55 in TU7000 at 200x200 and 58-70 in at 400x300.
Among the 26 verified 55-inch TVs in our database, the UN55TU7000 is #13 lightest of 26 at 30.6 lb — the 55-inch range here runs 22 to 41.7 lb. Within Samsung, the UN50TU7000, UN43TU7000, UN50TU8000 share the UN55TU7000's 200×200 mm pattern.
Model-specific mounting notes
Recessed mounting holes
The Samsung UN55TU7000's VESA holes sit in shallow wells, so a flat bracket can't sit flush against the cabinet. Use the spacers included with the TV or mount, and screws long enough to pass through the recess — see the screw note in the table above.
Spacers required
Samsung UN55TU7000 ships with (or requires) standoff spacers between the bracket and the cabinet. Skipping them can pinch cables, block ports, or crack the housing when you torque the screws. Keep the factory spacers with the hardware kit.
Mounts that fit the UN55TU7000
Filtered from our mount database: pattern covers 200×200 mm, rating is at least 40 lb (20% margin over the UN55TU7000's 30.6 lb), and the 55-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the UN55TU7000's 200×200 mm / 30.6 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the UN55TU7000's 200×200 mm / 30.6 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the UN55TU7000's 200×200 mm / 30.6 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the UN55TU7000's 200×200 mm / 30.6 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mount-It! MI-305 Slim Fixed (200x200 max)
Wafer-thin fixed mount for TVs with compact hole patterns up to 200x200 mm.
Supports VESA 75×75 up to 200×200 mm and 88 lb — clears the UN55TU7000's 200×200 mm / 30.6 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the UN55TU7000
The UN55TU7000 takes M8 bolts: M8 x 20-22 mm per Samsung's 2020 TV mounting guide. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length or the required spacers, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Replacement remote for the UN55TU7000
Samsung TV Remote Control (standard IR) — part number BN59-01315J — is the matching remote for the UN55TU7000. Standard non-voice IR remote running on 2 AAA batteries. OEM parts dealers designate it as the part originally shipped with the TU7000 line; BN59-01315A is the interchangeable 2019 substitute.
Full compatibility list, substitutes and ordering advice: BN59-01315J remote page. Order by the part number, not the TV size — one remote covers the platform. All Samsung remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 200 mm across and 200 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (UN55TU7000) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the UN55TU7000: 200×200 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Samsung UN55TU7000 use?
The Samsung UN55TU7000 uses a 200×200 mm VESA pattern — 200 mm between hole centers horizontally and 200 mm vertically (about 7.9×7.9 in). Any bracket whose supported range covers 200×200 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the UN55TU7000 need for wall mounting?
The UN55TU7000 takes M8 metric screws. Documented length: M8 x 20-22 mm per Samsung's 2020 TV mounting guide. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the UN55TU7000 with a hand-tightened test screw before torquing anything down.
How much does the UN55TU7000 weigh without the stand?
The UN55TU7000 weighs 30.6 lb (13.9 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 40 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the UN55TU7000?
A bracket sold as 400×400-only will not line up with the UN55TU7000's 200×200 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 200×200 mm, it fits directly. If not, a VESA adapter plate (200×200→400×400) bridges the difference; see our adapter guide.
What replacement remote works with the UN55TU7000?
Samsung TV Remote Control (standard IR) (part BN59-01315J) is the matching remote for the UN55TU7000. Standard non-voice IR remote running on 2 AAA batteries. OEM parts dealers designate it as the part originally shipped with the TU7000 line; BN59-01315A is the interchangeable 2019 substitute. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the UN55TU7000 be mounted on a full-motion bracket?
Yes. At 30.6 lb, the UN55TU7000 is within range of full-motion arms rated 40 lb or higher — 5 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.