Samsung UN65TU7000 VESA Size & Mount Fit
Quick answer
The Samsung UN65TU7000 uses a 400×300 mm VESA pattern (M8 screws). Screw spec: M8 x 20-22 mm. The UN65TU7000 weighs 45.4 lb (20.6 kg) without the stand. Any mount rated for VESA 400×300 or larger and at least 60 lb will fit the UN65TU7000. Verified against the Samsung documentation — see source below.
UN65TU7000 mounting specs
| VESA pattern | 400×300 mm (15.7×11.8 in) |
|---|---|
| Screw thread | M8 |
| Screw length | M8 x 20-22 mm per Samsung's 2020 TV mounting guide; owners commonly report recessed holes that need spacers and slightly longer bolts |
| Weight without stand | 45.4 lb (20.6 kg) |
| Screen size | 65 in |
| Model year | 2020 |
| Series | TU7000 Crystal UHD |
| Known aliases | UN65TU7000FXZA, UN65TU7000BXZA |
| Source | Manufacturer documentation |
Samsung's mounting guide groups 58-70 in TU7000 sizes at 400x300; smaller sizes differ - do not assume one mount fits all TU7000 sizes.
Among the 21 verified 65-inch TVs in our database, the UN65TU7000 is #10 lightest of 21 at 45.4 lb — the 65-inch range here runs 30.9 to 56.4 lb. Within Samsung, the UN58TU7000, UN70TU7000, UN65TU8000 share the UN65TU7000's 400×300 mm pattern.
Model-specific mounting notes
Recessed mounting holes
The Samsung UN65TU7000's VESA holes sit in shallow wells, so a flat bracket can't sit flush against the cabinet. Use the spacers included with the TV or mount, and screws long enough to pass through the recess — see the screw note in the table above.
Spacers required
Samsung UN65TU7000 ships with (or requires) standoff spacers between the bracket and the cabinet. Skipping them can pinch cables, block ports, or crack the housing when you torque the screws. Keep the factory spacers with the hardware kit.
Mounts that fit the UN65TU7000
Filtered from our mount database: pattern covers 400×300 mm, rating is at least 60 lb (20% margin over the UN65TU7000's 45.4 lb), and the 65-inch screen is within the listed range.
EchoGear EGLF2 Full Motion
Smooth dual-arm full motion with 22 in of extension for corner installs.
Supports VESA 100×100 up to 600×400 mm and 125 lb — clears the UN65TU7000's 400×300 mm / 45.4 lb.
Wall: 16-in dual stud required
EchoGear EGLT1 Tilting
Deep 15-degree tilt for bedroom and above-fireplace placements.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the UN65TU7000's 400×300 mm / 45.4 lb.
Wall: 16-in dual stud required
EchoGear EGLL1 Low-Profile Fixed
Ultra-low-profile fixed mount that keeps the TV about an inch off the wall.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the UN65TU7000's 400×300 mm / 45.4 lb.
Wall: 16-in dual stud required
Mount-It! MI-509B Ceiling
Ceiling mount for larger screens with tilt and telescoping height.
Supports VESA 100×100 up to 600×400 mm and 110 lb — clears the UN65TU7000's 400×300 mm / 45.4 lb.
Wall: lag-bolt into a ceiling joist per the manual
Pipishell PISF1 Fixed
Heavy-duty fixed plate for big panels; sits low and rigid.
Supports VESA 200×200 up to 600×400 mm and 132 lb — clears the UN65TU7000's 400×300 mm / 45.4 lb.
Wall: 16-in dual stud required
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the UN65TU7000
The UN65TU7000 takes M8 bolts: M8 x 20-22 mm per Samsung's 2020 TV mounting guide; owners commonly report recessed holes that need spacers and slightly longer bolts. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length or the required spacers, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Replacement remote for the UN65TU7000
Samsung TV Remote Control (standard IR) — part number BN59-01315J — is the matching remote for the UN65TU7000. Standard non-voice IR remote running on 2 AAA batteries. OEM parts dealers designate it as the part originally shipped with the TU7000 line; BN59-01315A is the interchangeable 2019 substitute.
Full compatibility list, substitutes and ordering advice: BN59-01315J remote page. Order by the part number, not the TV size — one remote covers the platform. All Samsung remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 400 mm across and 300 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (UN65TU7000) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the UN65TU7000: 400×300 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Samsung UN65TU7000 use?
The Samsung UN65TU7000 uses a 400×300 mm VESA pattern — 400 mm between hole centers horizontally and 300 mm vertically (about 15.7×11.8 in). Any bracket whose supported range covers 400×300 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the UN65TU7000 need for wall mounting?
The UN65TU7000 takes M8 metric screws. Documented length: M8 x 20-22 mm per Samsung's 2020 TV mounting guide; owners commonly report recessed holes that need spacers and slightly longer bolts. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the UN65TU7000 with a hand-tightened test screw before torquing anything down.
How much does the UN65TU7000 weigh without the stand?
The UN65TU7000 weighs 45.4 lb (20.6 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 60 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 600×400 mount fit the UN65TU7000?
A bracket sold as 600×400-only will not line up with the UN65TU7000's 400×300 mm holes. Most 600×400 mounts, however, support a range of patterns — if the spec sheet lists 400×300 mm, it fits directly. If not, a VESA adapter plate (400×300→600×400) bridges the difference; see our adapter guide.
What replacement remote works with the UN65TU7000?
Samsung TV Remote Control (standard IR) (part BN59-01315J) is the matching remote for the UN65TU7000. Standard non-voice IR remote running on 2 AAA batteries. OEM parts dealers designate it as the part originally shipped with the TU7000 line; BN59-01315A is the interchangeable 2019 substitute. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the UN65TU7000 be mounted on a full-motion bracket?
Yes. At 45.4 lb, the UN65TU7000 is within range of full-motion arms rated 60 lb or higher — 3 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.