Amazon Fire TV Omni 65 VESA Size & Mount Fit
Quick answer
The Amazon Fire TV Omni 65 uses a 400×200 mm VESA pattern (M6 screws). Screw spec: M6. The Fire TV Omni 65 weighs 42.5 lb (19.3 kg) without the stand. Any mount rated for VESA 400×200 or larger and at least 55 lb will fit the Fire TV Omni 65. Verified against the Amazon documentation — see source below.
Fire TV Omni 65 mounting specs
| VESA pattern | 400×200 mm (15.7×7.9 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 per third-party mounting guides - not documented by Amazon; hand-test first |
| Weight without stand | 42.5 lb (19.3 kg) |
| Stand width | 48.4 in — outer feet spread |
| Screen size | 65 in |
| Model year | 2021 |
| Series | Fire TV Omni Series |
| Known aliases | 4K65M600A, B08T6J1HG8 |
| Source | Manufacturer documentation |
Archived capture of Amazon's own page (live listing now redirects to a parent page): SKU 4K65M600A, 400x200 wide-short rectangle at 42.5 lb - square-only brackets won't line up.
Among the 21 verified 65-inch TVs in our database, the Fire TV Omni 65 is #8 lightest of 21 at 42.5 lb — the 65-inch range here runs 30.9 to 56.4 lb. The Fire TV Omni 65 is the only verified Amazon model here on the 400×200 mm pattern — the rest are listed in the Amazon hub.
Model-specific mounting notes
Non-square 400×200 mm pattern
The Amazon Fire TV Omni 65 uses a 400×200 mm rectangle, not a square. Mounts sold as "400×400-only" won't line up vertically — a bracket for the Amazon Fire TV Omni 65 must explicitly list 400×200 or cover it within its range.
Mounts that fit the Fire TV Omni 65
Filtered from our mount database: pattern covers 400×200 mm, rating is at least 55 lb (20% margin over the Fire TV Omni 65's 42.5 lb), and the 65-inch screen is within the listed range.
EchoGear EGLF2 Full Motion
Smooth dual-arm full motion with 22 in of extension for corner installs.
Supports VESA 100×100 up to 600×400 mm and 125 lb — clears the Fire TV Omni 65's 400×200 mm / 42.5 lb.
Wall: 16-in dual stud required
EchoGear EGLT1 Tilting
Deep 15-degree tilt for bedroom and above-fireplace placements.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the Fire TV Omni 65's 400×200 mm / 42.5 lb.
Wall: 16-in dual stud required
EchoGear EGLL1 Low-Profile Fixed
Ultra-low-profile fixed mount that keeps the TV about an inch off the wall.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the Fire TV Omni 65's 400×200 mm / 42.5 lb.
Wall: 16-in dual stud required
Mount-It! MI-509B Ceiling
Ceiling mount for larger screens with tilt and telescoping height.
Supports VESA 100×100 up to 600×400 mm and 110 lb — clears the Fire TV Omni 65's 400×200 mm / 42.5 lb.
Wall: lag-bolt into a ceiling joist per the manual
Pipishell PISF1 Fixed
Heavy-duty fixed plate for big panels; sits low and rigid.
Supports VESA 200×200 up to 600×400 mm and 132 lb — clears the Fire TV Omni 65's 400×200 mm / 42.5 lb.
Wall: 16-in dual stud required
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the Fire TV Omni 65
The Fire TV Omni 65 takes M6 bolts: M6 per third-party mounting guides - not documented by Amazon; hand-test first. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the Fire TV Omni 65 on furniture instead?
The Fire TV Omni 65's legs span 48.4 in — it fits consoles at least 51 in wide, so both feet sit fully on the surface with a safety margin.
Furniture narrower than 51 in? A universal pedestal stand bolts into the same 400×200 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the Fire TV Omni 65's 42.5 lb.
Replacement remote for the Fire TV Omni 65
Amazon Fire TV Alexa Voice Remote Enhanced — is the matching remote for the Fire TV Omni 65. Bluetooth voice remote (press-and-ask Alexa) with IR control of TV power and volume; 2 AAA batteries. Amazon's own replacement page lists the 4-Series Omni and Omni QLED explicitly; the Alexa Voice Remote Pro is the compatible upgrade while the 3rd-gen stick remote does NOT fit these TVs.
Full compatibility list, substitutes and ordering advice: Amazon Fire TV Alexa Voice Remote Enhanced page. Match the exact remote name — generations differ between model years. All Amazon remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 400 mm across and 200 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (Fire TV Omni 65) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the Fire TV Omni 65: 400×200 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Amazon Fire TV Omni 65 use?
The Amazon Fire TV Omni 65 uses a 400×200 mm VESA pattern — 400 mm between hole centers horizontally and 200 mm vertically (about 15.7×7.9 in). Any bracket whose supported range covers 400×200 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the Fire TV Omni 65 need for wall mounting?
The Fire TV Omni 65 takes M6 metric screws. Documented length: M6 per third-party mounting guides - not documented by Amazon; hand-test first. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the Fire TV Omni 65 with a hand-tightened test screw before torquing anything down.
How much does the Fire TV Omni 65 weigh without the stand?
The Fire TV Omni 65 weighs 42.5 lb (19.3 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 55 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 600×400 mount fit the Fire TV Omni 65?
A bracket sold as 600×400-only will not line up with the Fire TV Omni 65's 400×200 mm holes. Most 600×400 mounts, however, support a range of patterns — if the spec sheet lists 400×200 mm, it fits directly. If not, a VESA adapter plate (400×200→600×400) bridges the difference; see our adapter guide.
How far apart are the legs on the Fire TV Omni 65?
The Fire TV Omni 65's feet span about 48.4 in across the outside edges. A console at least 51 in wide lets both feet sit fully on the surface. Narrower furniture calls for a pedestal stand that bolts into the 400×200 mm VESA holes.
What replacement remote works with the Fire TV Omni 65?
Amazon Fire TV Alexa Voice Remote Enhanced is the matching remote for the Fire TV Omni 65. Bluetooth voice remote (press-and-ask Alexa) with IR control of TV power and volume; 2 AAA batteries. Amazon's own replacement page lists the 4-Series Omni and Omni QLED explicitly; the Alexa Voice Remote Pro is the compatible upgrade while the 3rd-gen stick remote does NOT fit these TVs. Match the exact remote name when ordering — remote generations differ between model years.
Can the Fire TV Omni 65 be mounted on a full-motion bracket?
Yes. At 42.5 lb, the Fire TV Omni 65 is within range of full-motion arms rated 55 lb or higher — 3 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.