Amazon Fire TV Omni QLED 55 VESA Size & Mount Fit
Quick answer
The Amazon Fire TV Omni QLED 55 uses a 400×300 mm VESA pattern (M6 screws). Screw spec: M6. The Fire TV Omni QLED 55 weighs 33.3 lb (15.1 kg) without the stand. Any mount rated for VESA 400×300 or larger and at least 45 lb will fit the Fire TV Omni QLED 55. Verified against the Amazon documentation — see source below.
Fire TV Omni QLED 55 mounting specs
| VESA pattern | 400×300 mm (15.7×11.8 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 per third-party mounting guides - not documented by Amazon; hand-test first |
| Weight without stand | 33.3 lb (15.1 kg) |
| Stand width | 46.2 in — outer feet spread |
| Screen size | 55 in |
| Model year | 2022 |
| Series | Fire TV Omni QLED Series |
| Known aliases | QL55F601A, B09N6ZRH6C |
| Source | Manufacturer documentation |
Archived capture of Amazon's PDP (SKU QL55F601A): 400x300 and 33.3 lb - the QLED generation is 8 lb heavier and uses a bigger pattern than the original Omni 55.
Among the 26 verified 55-inch TVs in our database, the Fire TV Omni QLED 55 is #19 lightest of 26 at 33.3 lb — the 55-inch range here runs 22 to 41.7 lb. Within Amazon, the Fire TV Omni QLED 65 shares the Fire TV Omni QLED 55's 400×300 mm pattern.
Mounts that fit the Fire TV Omni QLED 55
Filtered from our mount database: pattern covers 400×300 mm, rating is at least 45 lb (20% margin over the Fire TV Omni QLED 55's 33.3 lb), and the 55-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the Fire TV Omni QLED 55's 400×300 mm / 33.3 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the Fire TV Omni QLED 55's 400×300 mm / 33.3 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the Fire TV Omni QLED 55's 400×300 mm / 33.3 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the Fire TV Omni QLED 55's 400×300 mm / 33.3 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mounting Dream MD2163-K Fixed
Budget fixed bracket for small and mid-size TVs with a bubble level included.
Supports VESA 75×75 up to 400×400 mm and 100 lb — clears the Fire TV Omni QLED 55's 400×300 mm / 33.3 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the Fire TV Omni QLED 55
The Fire TV Omni QLED 55 takes M6 bolts: M6 per third-party mounting guides - not documented by Amazon; hand-test first. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the Fire TV Omni QLED 55 on furniture instead?
The Fire TV Omni QLED 55's legs span 46.2 in — it fits consoles at least 49 in wide, so both feet sit fully on the surface with a safety margin.
Furniture narrower than 49 in? A universal pedestal stand bolts into the same 400×300 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the Fire TV Omni QLED 55's 33.3 lb.
Replacement remote for the Fire TV Omni QLED 55
Amazon Fire TV Alexa Voice Remote Enhanced — is the matching remote for the Fire TV Omni QLED 55. Bluetooth voice remote (press-and-ask Alexa) with IR control of TV power and volume; 2 AAA batteries. Amazon's own replacement page lists the 4-Series Omni and Omni QLED explicitly; the Alexa Voice Remote Pro is the compatible upgrade while the 3rd-gen stick remote does NOT fit these TVs.
Full compatibility list, substitutes and ordering advice: Amazon Fire TV Alexa Voice Remote Enhanced page. Match the exact remote name — generations differ between model years. All Amazon remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 400 mm across and 300 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (Fire TV Omni QLED 55) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the Fire TV Omni QLED 55: 400×300 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Amazon Fire TV Omni QLED 55 use?
The Amazon Fire TV Omni QLED 55 uses a 400×300 mm VESA pattern — 400 mm between hole centers horizontally and 300 mm vertically (about 15.7×11.8 in). Any bracket whose supported range covers 400×300 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the Fire TV Omni QLED 55 need for wall mounting?
The Fire TV Omni QLED 55 takes M6 metric screws. Documented length: M6 per third-party mounting guides - not documented by Amazon; hand-test first. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the Fire TV Omni QLED 55 with a hand-tightened test screw before torquing anything down.
How much does the Fire TV Omni QLED 55 weigh without the stand?
The Fire TV Omni QLED 55 weighs 33.3 lb (15.1 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 45 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 600×400 mount fit the Fire TV Omni QLED 55?
A bracket sold as 600×400-only will not line up with the Fire TV Omni QLED 55's 400×300 mm holes. Most 600×400 mounts, however, support a range of patterns — if the spec sheet lists 400×300 mm, it fits directly. If not, a VESA adapter plate (400×300→600×400) bridges the difference; see our adapter guide.
How far apart are the legs on the Fire TV Omni QLED 55?
The Fire TV Omni QLED 55's feet span about 46.2 in across the outside edges. A console at least 49 in wide lets both feet sit fully on the surface. Narrower furniture calls for a pedestal stand that bolts into the 400×300 mm VESA holes.
What replacement remote works with the Fire TV Omni QLED 55?
Amazon Fire TV Alexa Voice Remote Enhanced is the matching remote for the Fire TV Omni QLED 55. Bluetooth voice remote (press-and-ask Alexa) with IR control of TV power and volume; 2 AAA batteries. Amazon's own replacement page lists the 4-Series Omni and Omni QLED explicitly; the Alexa Voice Remote Pro is the compatible upgrade while the 3rd-gen stick remote does NOT fit these TVs. Match the exact remote name when ordering — remote generations differ between model years.
Can the Fire TV Omni QLED 55 be mounted on a full-motion bracket?
Yes. At 33.3 lb, the Fire TV Omni QLED 55 is within range of full-motion arms rated 45 lb or higher — 5 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.