Amazon Fire TV 4-Series 55 VESA Size & Mount Fit
Quick answer
The Amazon Fire TV 4-Series 55 uses a 300×300 mm VESA pattern (M6 screws). Screw spec: M6. The Fire TV 4-Series 55 weighs 25 lb (11.3 kg) without the stand. Any mount rated for VESA 300×300 or larger and at least 35 lb will fit the Fire TV 4-Series 55. Verified against the Amazon documentation — see source below.
Fire TV 4-Series 55 mounting specs
| VESA pattern | 300×300 mm (11.8×11.8 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 per third-party mounting guides - not documented by Amazon; hand-test first |
| Weight without stand | 25 lb (11.3 kg) |
| Stand width | 39.6 in — outer feet spread |
| Screen size | 55 in |
| Model year | 2021 |
| Series | Fire TV 4-Series |
| Known aliases | 4K55N400A, B08P3QB66R, Fire TV 55 4-Series |
| Source | Manufacturer documentation |
Live Amazon PDP (SKU 4K55N400A): 300x300 at 25 lb - mounting numbers identical to the 55 in Omni, so the two Amazon 55s share bracket verdicts.
Among the 26 verified 55-inch TVs in our database, the Fire TV 4-Series 55 is #8 lightest of 26 at 25 lb — the 55-inch range here runs 22 to 41.7 lb. Within Amazon, the Fire TV Omni 55, Fire TV 4-Series 43 share the Fire TV 4-Series 55's 300×300 mm pattern.
Mounts that fit the Fire TV 4-Series 55
Filtered from our mount database: pattern covers 300×300 mm, rating is at least 35 lb (20% margin over the Fire TV 4-Series 55's 25 lb), and the 55-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the Fire TV 4-Series 55's 300×300 mm / 25 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the Fire TV 4-Series 55's 300×300 mm / 25 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the Fire TV 4-Series 55's 300×300 mm / 25 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the Fire TV 4-Series 55's 300×300 mm / 25 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mounting Dream MD2163-K Fixed
Budget fixed bracket for small and mid-size TVs with a bubble level included.
Supports VESA 75×75 up to 400×400 mm and 100 lb — clears the Fire TV 4-Series 55's 300×300 mm / 25 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the Fire TV 4-Series 55
The Fire TV 4-Series 55 takes M6 bolts: M6 per third-party mounting guides - not documented by Amazon; hand-test first. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the Fire TV 4-Series 55 on furniture instead?
The Fire TV 4-Series 55's legs span 39.6 in — it fits consoles at least 42 in wide, so both feet sit fully on the surface with a safety margin.
Furniture narrower than 42 in? A universal pedestal stand bolts into the same 300×300 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the Fire TV 4-Series 55's 25 lb.
Replacement remote for the Fire TV 4-Series 55
Amazon Fire TV Alexa Voice Remote Enhanced — is the matching remote for the Fire TV 4-Series 55. Bluetooth voice remote (press-and-ask Alexa) with IR control of TV power and volume; 2 AAA batteries. Amazon's own replacement page lists the 4-Series Omni and Omni QLED explicitly; the Alexa Voice Remote Pro is the compatible upgrade while the 3rd-gen stick remote does NOT fit these TVs.
Full compatibility list, substitutes and ordering advice: Amazon Fire TV Alexa Voice Remote Enhanced page. Match the exact remote name — generations differ between model years. All Amazon remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 300 mm across and 300 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (Fire TV 4-Series 55) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the Fire TV 4-Series 55: 300×300 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Amazon Fire TV 4-Series 55 use?
The Amazon Fire TV 4-Series 55 uses a 300×300 mm VESA pattern — 300 mm between hole centers horizontally and 300 mm vertically (about 11.8×11.8 in). Any bracket whose supported range covers 300×300 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the Fire TV 4-Series 55 need for wall mounting?
The Fire TV 4-Series 55 takes M6 metric screws. Documented length: M6 per third-party mounting guides - not documented by Amazon; hand-test first. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the Fire TV 4-Series 55 with a hand-tightened test screw before torquing anything down.
How much does the Fire TV 4-Series 55 weigh without the stand?
The Fire TV 4-Series 55 weighs 25 lb (11.3 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 35 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the Fire TV 4-Series 55?
A bracket sold as 400×400-only will not line up with the Fire TV 4-Series 55's 300×300 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 300×300 mm, it fits directly. If not, a VESA adapter plate (300×300→400×400) bridges the difference; see our adapter guide.
How far apart are the legs on the Fire TV 4-Series 55?
The Fire TV 4-Series 55's feet span about 39.6 in across the outside edges. A console at least 42 in wide lets both feet sit fully on the surface. Narrower furniture calls for a pedestal stand that bolts into the 300×300 mm VESA holes.
What replacement remote works with the Fire TV 4-Series 55?
Amazon Fire TV Alexa Voice Remote Enhanced is the matching remote for the Fire TV 4-Series 55. Bluetooth voice remote (press-and-ask Alexa) with IR control of TV power and volume; 2 AAA batteries. Amazon's own replacement page lists the 4-Series Omni and Omni QLED explicitly; the Alexa Voice Remote Pro is the compatible upgrade while the 3rd-gen stick remote does NOT fit these TVs. Match the exact remote name when ordering — remote generations differ between model years.
Can the Fire TV 4-Series 55 be mounted on a full-motion bracket?
Yes. At 25 lb, the Fire TV 4-Series 55 is within range of full-motion arms rated 35 lb or higher — 5 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.