LG 50UP7000PUA VESA Size & Mount Fit
Quick answer
The LG 50UP7000PUA uses a 300×300 mm VESA pattern (M6 screws). Screw spec: M6. The 50UP7000PUA weighs 20.9 lb (9.5 kg) without the stand. Any mount rated for VESA 300×300 or larger and at least 30 lb will fit the 50UP7000PUA. Verified against the LG documentation — see source below.
50UP7000PUA mounting specs
| VESA pattern | 300×300 mm (11.8×11.8 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 per the LG owner's manual - length not published |
| Weight without stand | 20.9 lb (9.5 kg) |
| Stand width | 35.6 in — stand footprint |
| Screen size | 50 in |
| Model year | 2021 |
| Series | UP7000 UHD |
| Known aliases | 50UP7000PUA.AUSQ |
| Source | Manufacturer documentation |
LG's sheet prints this block's weights with a units typo (inch marks); 20.9 is pounds by context between the 43 in (15.7 lb) and 55 in (24.7 lb) rows.
Among the 7 verified 50-inch TVs in our database, the 50UP7000PUA is #2 lightest of 7 at 20.9 lb — the 50-inch range here runs 20 to 27.4 lb. Within LG, the OLED65G2PUA, 43UP7000PUA, 55UP7000PUA share the 50UP7000PUA's 300×300 mm pattern.
Mounts that fit the 50UP7000PUA
Filtered from our mount database: pattern covers 300×300 mm, rating is at least 30 lb (20% margin over the 50UP7000PUA's 20.9 lb), and the 50-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the 50UP7000PUA's 300×300 mm / 20.9 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the 50UP7000PUA's 300×300 mm / 20.9 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the 50UP7000PUA's 300×300 mm / 20.9 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the 50UP7000PUA's 300×300 mm / 20.9 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mounting Dream MD2163-K Fixed
Budget fixed bracket for small and mid-size TVs with a bubble level included.
Supports VESA 75×75 up to 400×400 mm and 100 lb — clears the 50UP7000PUA's 300×300 mm / 20.9 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the 50UP7000PUA
The 50UP7000PUA takes M6 bolts: M6 per the LG owner's manual - length not published. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the 50UP7000PUA on furniture instead?
Per LG's documentation, the 50UP7000PUA's factory stand is 35.6 in wide — plan a console at least 38 in wide. The panel can overhang the furniture; the stand cannot.
Furniture narrower than 38 in? A universal pedestal stand bolts into the same 300×300 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the 50UP7000PUA's 20.9 lb.
Replacement remote for the 50UP7000PUA
LG standard IR remote (2021 UHD) — part number AKB76037601 — is the matching remote for the 50UP7000PUA. Standard IR remote - no voice or pointer; 2 AAA batteries. The UP7000 ships with this standard remote (the Magic Remote AN-MR21GA works but is sold separately); LG-authorized parts stores sell AKB76037601 as the OEM part for 43-65UP7000PUA.
Full compatibility list, substitutes and ordering advice: AKB76037601 remote page. Order by the part number, not the TV size — one remote covers the platform. All LG remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 300 mm across and 300 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (50UP7000PUA) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the 50UP7000PUA: 300×300 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the LG 50UP7000PUA use?
The LG 50UP7000PUA uses a 300×300 mm VESA pattern — 300 mm between hole centers horizontally and 300 mm vertically (about 11.8×11.8 in). Any bracket whose supported range covers 300×300 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the 50UP7000PUA need for wall mounting?
The 50UP7000PUA takes M6 metric screws. Documented length: M6 per the LG owner's manual - length not published. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the 50UP7000PUA with a hand-tightened test screw before torquing anything down.
How much does the 50UP7000PUA weigh without the stand?
The 50UP7000PUA weighs 20.9 lb (9.5 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 30 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the 50UP7000PUA?
A bracket sold as 400×400-only will not line up with the 50UP7000PUA's 300×300 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 300×300 mm, it fits directly. If not, a VESA adapter plate (300×300→400×400) bridges the difference; see our adapter guide.
How wide is the 50UP7000PUA's stand?
Per the manufacturer's documentation, the 50UP7000PUA's factory stand is about 35.6 in wide. Plan at least 38 in of flat, level surface: the panel can overhang the furniture, the stand cannot. If your console is narrower, a universal pedestal stand bolts into the 300×300 mm VESA holes instead.
What replacement remote works with the 50UP7000PUA?
LG standard IR remote (2021 UHD) (part AKB76037601) is the matching remote for the 50UP7000PUA. Standard IR remote - no voice or pointer; 2 AAA batteries. The UP7000 ships with this standard remote (the Magic Remote AN-MR21GA works but is sold separately); LG-authorized parts stores sell AKB76037601 as the OEM part for 43-65UP7000PUA. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the 50UP7000PUA be mounted on a full-motion bracket?
Yes. At 20.9 lb, the 50UP7000PUA is within range of full-motion arms rated 30 lb or higher — 5 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.