LG OLED65G2PUA VESA Size & Mount Fit
Quick answer
The LG OLED65G2PUA uses a 300×300 mm VESA pattern (M6 screws). Screw spec: M6 - length not published by LG. The OLED65G2PUA weighs 50.3 lb (22.8 kg) without the stand. Any mount rated for VESA 300×300 or larger and at least 65 lb will fit the OLED65G2PUA. Verified against the LG documentation — see source below.
OLED65G2PUA mounting specs
| VESA pattern | 300×300 mm (11.8×11.8 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 - length not published by LG; hand-test with the mount's shortest M6 bolts and do not force |
| Weight without stand | 50.3 lb (22.8 kg) |
| Stand | Not included — this model ships with a wall bracket; a tabletop stand is a separate purchase. |
| Screen size | 65 in |
| Model year | 2022 |
| Series | G2 evo OLED Gallery |
| Known aliases | OLED65G2AUA |
| Source | Manufacturer documentation |
Gallery model: uses square 300x300 (not the C-series 300x200) and ships with LG's flush wall bracket in the box; a tabletop stand is a separate purchase. LG's optional tabletop stand for the G2 (sold separately) is 17 in wide.
Among the 21 verified 65-inch TVs in our database, the OLED65G2PUA is #16 lightest of 21 at 50.3 lb — the 65-inch range here runs 30.9 to 56.4 lb. Within LG, the 43UP7000PUA, 50UP7000PUA, 55UP7000PUA share the OLED65G2PUA's 300×300 mm pattern.
Mounts that fit the OLED65G2PUA
Filtered from our mount database: pattern covers 300×300 mm, rating is at least 65 lb (20% margin over the OLED65G2PUA's 50.3 lb), and the 65-inch screen is within the listed range.
EchoGear EGLF2 Full Motion
Smooth dual-arm full motion with 22 in of extension for corner installs.
Supports VESA 100×100 up to 600×400 mm and 125 lb — clears the OLED65G2PUA's 300×300 mm / 50.3 lb.
Wall: 16-in dual stud required
EchoGear EGLT1 Tilting
Deep 15-degree tilt for bedroom and above-fireplace placements.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the OLED65G2PUA's 300×300 mm / 50.3 lb.
Wall: 16-in dual stud required
EchoGear EGLL1 Low-Profile Fixed
Ultra-low-profile fixed mount that keeps the TV about an inch off the wall.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the OLED65G2PUA's 300×300 mm / 50.3 lb.
Wall: 16-in dual stud required
Mount-It! MI-509B Ceiling
Ceiling mount for larger screens with tilt and telescoping height.
Supports VESA 100×100 up to 600×400 mm and 110 lb — clears the OLED65G2PUA's 300×300 mm / 50.3 lb.
Wall: lag-bolt into a ceiling joist per the manual
Pipishell PISF1 Fixed
Heavy-duty fixed plate for big panels; sits low and rigid.
Supports VESA 200×200 up to 600×400 mm and 132 lb — clears the OLED65G2PUA's 300×300 mm / 50.3 lb.
Wall: 16-in dual stud required
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the OLED65G2PUA
The OLED65G2PUA takes M6 bolts: M6 - length not published by LG; hand-test with the mount's shortest M6 bolts and do not force. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Replacement remote for the OLED65G2PUA
LG Magic Remote with Magic Tap (2022) — part number AN-MR22GN — is the matching remote for the OLED65G2PUA. Magic Remote with voice and pointer plus NFC Magic Tap (p/n AKB76040009). The Gallery G2 ships with the NFC-equipped MR22GN rather than the standard MR22GA; LG sells it as the official 2022 Magic Remote w/ Magic Tap.
Full compatibility list, substitutes and ordering advice: AN-MR22GN remote page. Order by the part number, not the TV size — one remote covers the platform. All LG remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 300 mm across and 300 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (OLED65G2PUA) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the OLED65G2PUA: 300×300 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the LG OLED65G2PUA use?
The LG OLED65G2PUA uses a 300×300 mm VESA pattern — 300 mm between hole centers horizontally and 300 mm vertically (about 11.8×11.8 in). Any bracket whose supported range covers 300×300 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the OLED65G2PUA need for wall mounting?
The OLED65G2PUA takes M6 metric screws. Documented length: M6 - length not published by LG; hand-test with the mount's shortest M6 bolts and do not force. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the OLED65G2PUA with a hand-tightened test screw before torquing anything down.
How much does the OLED65G2PUA weigh without the stand?
The OLED65G2PUA weighs 50.3 lb (22.8 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 65 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the OLED65G2PUA?
A bracket sold as 400×400-only will not line up with the OLED65G2PUA's 300×300 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 300×300 mm, it fits directly. If not, a VESA adapter plate (300×300→400×400) bridges the difference; see our adapter guide.
What replacement remote works with the OLED65G2PUA?
LG Magic Remote with Magic Tap (2022) (part AN-MR22GN) is the matching remote for the OLED65G2PUA. Magic Remote with voice and pointer plus NFC Magic Tap (p/n AKB76040009). The Gallery G2 ships with the NFC-equipped MR22GN rather than the standard MR22GA; LG sells it as the official 2022 Magic Remote w/ Magic Tap. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the OLED65G2PUA be mounted on a full-motion bracket?
Yes. At 50.3 lb, the OLED65G2PUA is within range of full-motion arms rated 65 lb or higher — 3 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.