LG OLED55B2PUA VESA Size & Mount Fit
Quick answer
The LG OLED55B2PUA uses a 300×200 mm VESA pattern (M6 screws). Screw spec: M6 - length not published by LG. The OLED55B2PUA weighs 41.7 lb (18.9 kg) without the stand. Any mount rated for VESA 300×200 or larger and at least 55 lb will fit the OLED55B2PUA. Verified against the LG documentation — see source below.
OLED55B2PUA mounting specs
| VESA pattern | 300×200 mm (11.8×7.9 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 - length not published by LG; hand-test with the mount's shortest M6 bolts and do not force |
| Weight without stand | 41.7 lb (18.9 kg) |
| Stand width | 22 in — stand footprint |
| Screen size | 55 in |
| Model year | 2022 |
| Series | B2 OLED |
| Known aliases | OLED55B2AUA |
| Source | Manufacturer documentation |
B2 keeps the older heavy chassis (41.7 lb) while the same-year 55 in C2 dropped to 28 lb - the budget OLED tier skipped the composite-fiber diet.
Among the 26 verified 55-inch TVs in our database, the OLED55B2PUA is the heaviest at 41.7 lb — the 55-inch range here runs 22 to 41.7 lb. Within LG, the OLED55C2PUA, OLED65C2PUA, OLED42C2PUA share the OLED55B2PUA's 300×200 mm pattern.
Mounts that fit the OLED55B2PUA
Filtered from our mount database: pattern covers 300×200 mm, rating is at least 55 lb (20% margin over the OLED55B2PUA's 41.7 lb), and the 55-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the OLED55B2PUA's 300×200 mm / 41.7 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the OLED55B2PUA's 300×200 mm / 41.7 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the OLED55B2PUA's 300×200 mm / 41.7 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the OLED55B2PUA's 300×200 mm / 41.7 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mounting Dream MD2163-K Fixed
Budget fixed bracket for small and mid-size TVs with a bubble level included.
Supports VESA 75×75 up to 400×400 mm and 100 lb — clears the OLED55B2PUA's 300×200 mm / 41.7 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the OLED55B2PUA
The OLED55B2PUA takes M6 bolts: M6 - length not published by LG; hand-test with the mount's shortest M6 bolts and do not force. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the OLED55B2PUA on furniture instead?
Per LG's documentation, the OLED55B2PUA's factory stand is 22 in wide — plan a console at least 24 in wide. The panel can overhang the furniture; the stand cannot.
Furniture narrower than 24 in? A universal pedestal stand bolts into the same 300×200 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the OLED55B2PUA's 41.7 lb.
Replacement remote for the OLED55B2PUA
LG Magic Remote (2022) — part number AN-MR22GA — is the matching remote for the OLED55B2PUA. Bluetooth RF Magic Remote with voice and motion pointer. LG's 2022 Magic Remote guide confirms p/n AKB76039902; dealer compatibility lists name the C2 B2 and A2 OLED models explicitly.
Full compatibility list, substitutes and ordering advice: AN-MR22GA remote page. Order by the part number, not the TV size — one remote covers the platform. All LG remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 300 mm across and 200 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (OLED55B2PUA) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the OLED55B2PUA: 300×200 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the LG OLED55B2PUA use?
The LG OLED55B2PUA uses a 300×200 mm VESA pattern — 300 mm between hole centers horizontally and 200 mm vertically (about 11.8×7.9 in). Any bracket whose supported range covers 300×200 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the OLED55B2PUA need for wall mounting?
The OLED55B2PUA takes M6 metric screws. Documented length: M6 - length not published by LG; hand-test with the mount's shortest M6 bolts and do not force. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the OLED55B2PUA with a hand-tightened test screw before torquing anything down.
How much does the OLED55B2PUA weigh without the stand?
The OLED55B2PUA weighs 41.7 lb (18.9 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 55 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the OLED55B2PUA?
A bracket sold as 400×400-only will not line up with the OLED55B2PUA's 300×200 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 300×200 mm, it fits directly. If not, a VESA adapter plate (300×200→400×400) bridges the difference; see our adapter guide.
How wide is the OLED55B2PUA's stand?
Per the manufacturer's documentation, the OLED55B2PUA's factory stand is about 22 in wide. Plan at least 24 in of flat, level surface: the panel can overhang the furniture, the stand cannot. If your console is narrower, a universal pedestal stand bolts into the 300×200 mm VESA holes instead.
What replacement remote works with the OLED55B2PUA?
LG Magic Remote (2022) (part AN-MR22GA) is the matching remote for the OLED55B2PUA. Bluetooth RF Magic Remote with voice and motion pointer. LG's 2022 Magic Remote guide confirms p/n AKB76039902; dealer compatibility lists name the C2 B2 and A2 OLED models explicitly. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the OLED55B2PUA be mounted on a full-motion bracket?
Yes. At 41.7 lb, the OLED55B2PUA is within range of full-motion arms rated 55 lb or higher — 5 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.