Samsung QN55Q60B VESA Size & Mount Fit
Quick answer
The Samsung QN55Q60B uses a 200×200 mm VESA pattern (M8 screws). Screw spec: M8. The QN55Q60B weighs 34.2 lb (15.5 kg) without the stand. Any mount rated for VESA 200×200 or larger and at least 45 lb will fit the QN55Q60B. Verified against the Samsung documentation — see source below.
QN55Q60B mounting specs
| VESA pattern | 200×200 mm (7.9×7.9 in) |
|---|---|
| Screw thread | M8 |
| Screw length | M8 per Samsung owner's manuals (thread not stated on this spec sheet); the 2021+ Q-series guides list 11-13 mm hole depths - keep bolts short |
| Weight without stand | 34.2 lb (15.5 kg) |
| Screen size | 55 in |
| Model year | 2022 |
| Series | Q60B QLED |
| Known aliases | QN55Q60BAFXZA |
| Source | Manufacturer documentation |
QLED panel on the compact 200x200 pattern at 34.2 lb; order code suffix is AFXZA for this 2022 QLED generation.
Among the 26 verified 55-inch TVs in our database, the QN55Q60B is #21 lightest of 26 at 34.2 lb — the 55-inch range here runs 22 to 41.7 lb. Within Samsung, the UN55TU7000, UN50TU7000, UN43TU7000 share the QN55Q60B's 200×200 mm pattern.
Mounts that fit the QN55Q60B
Filtered from our mount database: pattern covers 200×200 mm, rating is at least 45 lb (20% margin over the QN55Q60B's 34.2 lb), and the 55-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the QN55Q60B's 200×200 mm / 34.2 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the QN55Q60B's 200×200 mm / 34.2 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the QN55Q60B's 200×200 mm / 34.2 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the QN55Q60B's 200×200 mm / 34.2 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mount-It! MI-305 Slim Fixed (200x200 max)
Wafer-thin fixed mount for TVs with compact hole patterns up to 200x200 mm.
Supports VESA 75×75 up to 200×200 mm and 88 lb — clears the QN55Q60B's 200×200 mm / 34.2 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the QN55Q60B
The QN55Q60B takes M8 bolts: M8 per Samsung owner's manuals (thread not stated on this spec sheet); the 2021+ Q-series guides list 11-13 mm hole depths - keep bolts short. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Replacement remote for the QN55Q60B
Samsung Smart SolarCell Remote (TM2280E) — part number BN59-01385A — is the matching remote for the QN55Q60B. Solar plus USB-C rechargeable voice remote (Bluetooth/RF with IR) - no disposable batteries. OEM dealer listings name QN55Q60BAFXZA and QN55/QN65QN90BAFXZA among the models this remote originally shipped with; BN59-01385B and BN59-01391A/B are interchangeable variants.
Full compatibility list, substitutes and ordering advice: BN59-01385A remote page. Order by the part number, not the TV size — one remote covers the platform. All Samsung remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 200 mm across and 200 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (QN55Q60B) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the QN55Q60B: 200×200 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Samsung QN55Q60B use?
The Samsung QN55Q60B uses a 200×200 mm VESA pattern — 200 mm between hole centers horizontally and 200 mm vertically (about 7.9×7.9 in). Any bracket whose supported range covers 200×200 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the QN55Q60B need for wall mounting?
The QN55Q60B takes M8 metric screws. Documented length: M8 per Samsung owner's manuals (thread not stated on this spec sheet); the 2021+ Q-series guides list 11-13 mm hole depths - keep bolts short. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the QN55Q60B with a hand-tightened test screw before torquing anything down.
How much does the QN55Q60B weigh without the stand?
The QN55Q60B weighs 34.2 lb (15.5 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 45 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the QN55Q60B?
A bracket sold as 400×400-only will not line up with the QN55Q60B's 200×200 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 200×200 mm, it fits directly. If not, a VESA adapter plate (200×200→400×400) bridges the difference; see our adapter guide.
What replacement remote works with the QN55Q60B?
Samsung Smart SolarCell Remote (TM2280E) (part BN59-01385A) is the matching remote for the QN55Q60B. Solar plus USB-C rechargeable voice remote (Bluetooth/RF with IR) - no disposable batteries. OEM dealer listings name QN55Q60BAFXZA and QN55/QN65QN90BAFXZA among the models this remote originally shipped with; BN59-01385B and BN59-01391A/B are interchangeable variants. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the QN55Q60B be mounted on a full-motion bracket?
Yes. At 34.2 lb, the QN55Q60B is within range of full-motion arms rated 45 lb or higher — 5 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.