Samsung UN55AU8000 VESA Size & Mount Fit
Quick answer
The Samsung UN55AU8000 uses a 200×200 mm VESA pattern (M8 screws). Screw spec: M8. The UN55AU8000 weighs 34.2 lb (15.5 kg) without the stand. Any mount rated for VESA 200×200 or larger and at least 45 lb will fit the UN55AU8000. Verified against the Samsung documentation — see source below.
UN55AU8000 mounting specs
| VESA pattern | 200×200 mm (7.9×7.9 in) |
|---|---|
| Screw thread | M8 |
| Screw length | M8 per Samsung owner's manuals (thread not stated on this spec sheet); 2021+ Samsung guides list shallower 11-13 mm hole depths than 2020 models - hand-test length |
| Weight without stand | 34.2 lb (15.5 kg) |
| Screen size | 55 in |
| Model year | 2021 |
| Series | AU8000 Crystal UHD |
| Known aliases | UN55AU8000FXZA |
| Source | Manufacturer documentation |
AU8000 55 in stays on 200x200 but is 3.6 lb heavier than the 55 in TU8000; Samsung published no AU8000 mounting guide, so verify screw length by hand-test.
Among the 26 verified 55-inch TVs in our database, the UN55AU8000 is #20 lightest of 26 at 34.2 lb — the 55-inch range here runs 22 to 41.7 lb. Within Samsung, the UN55TU7000, UN50TU7000, UN43TU7000 share the UN55AU8000's 200×200 mm pattern.
Mounts that fit the UN55AU8000
Filtered from our mount database: pattern covers 200×200 mm, rating is at least 45 lb (20% margin over the UN55AU8000's 34.2 lb), and the 55-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the UN55AU8000's 200×200 mm / 34.2 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the UN55AU8000's 200×200 mm / 34.2 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the UN55AU8000's 200×200 mm / 34.2 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the UN55AU8000's 200×200 mm / 34.2 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mount-It! MI-305 Slim Fixed (200x200 max)
Wafer-thin fixed mount for TVs with compact hole patterns up to 200x200 mm.
Supports VESA 75×75 up to 200×200 mm and 88 lb — clears the UN55AU8000's 200×200 mm / 34.2 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the UN55AU8000
The UN55AU8000 takes M8 bolts: M8 per Samsung owner's manuals (thread not stated on this spec sheet); 2021+ Samsung guides list shallower 11-13 mm hole depths than 2020 models - hand-test length. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Replacement remote for the UN55AU8000
Samsung Voice Remote (TM2180A) — part number BN59-01363C — is the matching remote for the UN55AU8000. Voice remote of the TM2180A family. Designated by OEM parts dealers for the AU8000 line; aftermarket listings also sell BN59-01363A and BN59-01350C/F as compatible - match the part number printed inside your remote's battery bay.
Full compatibility list, substitutes and ordering advice: BN59-01363C remote page. Order by the part number, not the TV size — one remote covers the platform. All Samsung remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 200 mm across and 200 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (UN55AU8000) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the UN55AU8000: 200×200 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Samsung UN55AU8000 use?
The Samsung UN55AU8000 uses a 200×200 mm VESA pattern — 200 mm between hole centers horizontally and 200 mm vertically (about 7.9×7.9 in). Any bracket whose supported range covers 200×200 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the UN55AU8000 need for wall mounting?
The UN55AU8000 takes M8 metric screws. Documented length: M8 per Samsung owner's manuals (thread not stated on this spec sheet); 2021+ Samsung guides list shallower 11-13 mm hole depths than 2020 models - hand-test length. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the UN55AU8000 with a hand-tightened test screw before torquing anything down.
How much does the UN55AU8000 weigh without the stand?
The UN55AU8000 weighs 34.2 lb (15.5 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 45 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the UN55AU8000?
A bracket sold as 400×400-only will not line up with the UN55AU8000's 200×200 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 200×200 mm, it fits directly. If not, a VESA adapter plate (200×200→400×400) bridges the difference; see our adapter guide.
What replacement remote works with the UN55AU8000?
Samsung Voice Remote (TM2180A) (part BN59-01363C) is the matching remote for the UN55AU8000. Voice remote of the TM2180A family. Designated by OEM parts dealers for the AU8000 line; aftermarket listings also sell BN59-01363A and BN59-01350C/F as compatible - match the part number printed inside your remote's battery bay. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the UN55AU8000 be mounted on a full-motion bracket?
Yes. At 34.2 lb, the UN55AU8000 is within range of full-motion arms rated 45 lb or higher — 5 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.