Samsung UN55TU8000 VESA Size & Mount Fit
Quick answer
The Samsung UN55TU8000 uses a 200×200 mm VESA pattern (M8 screws). Screw spec: M8. The UN55TU8000 weighs 30.6 lb (13.9 kg) without the stand. Any mount rated for VESA 200×200 or larger and at least 40 lb will fit the UN55TU8000. Verified against the Samsung documentation — see source below.
UN55TU8000 mounting specs
| VESA pattern | 200×200 mm (7.9×7.9 in) |
|---|---|
| Screw thread | M8 |
| Screw length | M8 (1.25 mm pitch) x 20-22 mm per Samsung's 2020 TU8000 mounting guide (43-55 in row) |
| Weight without stand | 30.6 lb (13.9 kg) |
| Screen size | 55 in |
| Model year | 2020 |
| Series | TU8000 Crystal UHD |
| Known aliases | UN55TU8000FXZA |
| Source | Manufacturer documentation |
Keeps the same 200x200 pattern as the 50 in TU8000 - the step up to 400x300 happens at 65 in for this series.
Among the 26 verified 55-inch TVs in our database, the UN55TU8000 is #14 lightest of 26 at 30.6 lb — the 55-inch range here runs 22 to 41.7 lb. Within Samsung, the UN55TU7000, UN50TU7000, UN43TU7000 share the UN55TU8000's 200×200 mm pattern.
Mounts that fit the UN55TU8000
Filtered from our mount database: pattern covers 200×200 mm, rating is at least 40 lb (20% margin over the UN55TU8000's 30.6 lb), and the 55-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the UN55TU8000's 200×200 mm / 30.6 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the UN55TU8000's 200×200 mm / 30.6 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the UN55TU8000's 200×200 mm / 30.6 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the UN55TU8000's 200×200 mm / 30.6 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mount-It! MI-305 Slim Fixed (200x200 max)
Wafer-thin fixed mount for TVs with compact hole patterns up to 200x200 mm.
Supports VESA 75×75 up to 200×200 mm and 88 lb — clears the UN55TU8000's 200×200 mm / 30.6 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the UN55TU8000
The UN55TU8000 takes M8 bolts: M8 (1.25 mm pitch) x 20-22 mm per Samsung's 2020 TU8000 mounting guide (43-55 in row). A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Replacement remote for the UN55TU8000
Samsung Smart Remote (RMCSPR1AP1) — part number BN59-01330A — is the matching remote for the UN55TU8000. Bluetooth/RF voice remote with IR fallback. Listed by OEM parts dealers as the part originally shipped with the TU8000 line; BN59-01330E is the substitute part.
Full compatibility list, substitutes and ordering advice: BN59-01330A remote page. Order by the part number, not the TV size — one remote covers the platform. All Samsung remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 200 mm across and 200 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (UN55TU8000) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the UN55TU8000: 200×200 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Samsung UN55TU8000 use?
The Samsung UN55TU8000 uses a 200×200 mm VESA pattern — 200 mm between hole centers horizontally and 200 mm vertically (about 7.9×7.9 in). Any bracket whose supported range covers 200×200 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the UN55TU8000 need for wall mounting?
The UN55TU8000 takes M8 metric screws. Documented length: M8 (1.25 mm pitch) x 20-22 mm per Samsung's 2020 TU8000 mounting guide (43-55 in row). A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the UN55TU8000 with a hand-tightened test screw before torquing anything down.
How much does the UN55TU8000 weigh without the stand?
The UN55TU8000 weighs 30.6 lb (13.9 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 40 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the UN55TU8000?
A bracket sold as 400×400-only will not line up with the UN55TU8000's 200×200 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 200×200 mm, it fits directly. If not, a VESA adapter plate (200×200→400×400) bridges the difference; see our adapter guide.
What replacement remote works with the UN55TU8000?
Samsung Smart Remote (RMCSPR1AP1) (part BN59-01330A) is the matching remote for the UN55TU8000. Bluetooth/RF voice remote with IR fallback. Listed by OEM parts dealers as the part originally shipped with the TU8000 line; BN59-01330E is the substitute part. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the UN55TU8000 be mounted on a full-motion bracket?
Yes. At 30.6 lb, the UN55TU8000 is within range of full-motion arms rated 40 lb or higher — 5 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.