TCL 65S455 VESA Size & Mount Fit
Quick answer
The TCL 65S455 uses a 200×200 mm VESA pattern (M6 screws). Screw spec: M6 x 12 mm. The 65S455 weighs 30.9 lb (14 kg) without the stand. Any mount rated for VESA 200×200 or larger and at least 40 lb will fit the 65S455. Verified against the TCL documentation — see source below.
65S455 mounting specs
| VESA pattern | 200×200 mm (7.9×7.9 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 x 12 mm per TCL's spec page |
| Weight without stand | 30.9 lb (14 kg) |
| Stand width | 50.2 in — stand footprint |
| Screen size | 65 in |
| Model year | 2022 |
| Series | 4-Series Roku TV |
| Known aliases | 65S455-CA, 65S451 |
| Source | Manufacturer documentation |
Unusual: a 65 in panel with only a 200x200 pattern, confirmed on TCL's own page - most 65 in mounts expect larger patterns, so check the plate's minimum too.
Among the 21 verified 65-inch TVs in our database, the 65S455 is the lightest at 30.9 lb — the 65-inch range here runs 30.9 to 56.4 lb. Within TCL, the 55S455 shares the 65S455's 200×200 mm pattern.
Mounts that fit the 65S455
Filtered from our mount database: pattern covers 200×200 mm, rating is at least 40 lb (20% margin over the 65S455's 30.9 lb), and the 65-inch screen is within the listed range.
EchoGear EGLF2 Full Motion
Smooth dual-arm full motion with 22 in of extension for corner installs.
Supports VESA 100×100 up to 600×400 mm and 125 lb — clears the 65S455's 200×200 mm / 30.9 lb.
Wall: 16-in dual stud required
EchoGear EGLT1 Tilting
Deep 15-degree tilt for bedroom and above-fireplace placements.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the 65S455's 200×200 mm / 30.9 lb.
Wall: 16-in dual stud required
EchoGear EGLL1 Low-Profile Fixed
Ultra-low-profile fixed mount that keeps the TV about an inch off the wall.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the 65S455's 200×200 mm / 30.9 lb.
Wall: 16-in dual stud required
Mount-It! MI-509B Ceiling
Ceiling mount for larger screens with tilt and telescoping height.
Supports VESA 100×100 up to 600×400 mm and 110 lb — clears the 65S455's 200×200 mm / 30.9 lb.
Wall: lag-bolt into a ceiling joist per the manual
Pipishell PISF1 Fixed
Heavy-duty fixed plate for big panels; sits low and rigid.
Supports VESA 200×200 up to 600×400 mm and 132 lb — clears the 65S455's 200×200 mm / 30.9 lb.
Wall: 16-in dual stud required
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the 65S455
The 65S455 takes M6 bolts: M6 x 12 mm per TCL's spec page. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the 65S455 on furniture instead?
Per TCL's documentation, the 65S455's factory stand is 50.2 in wide — plan a console at least 53 in wide. The panel can overhang the furniture; the stand cannot.
Furniture narrower than 53 in? A universal pedestal stand bolts into the same 200×200 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the 65S455's 30.9 lb.
Replacement remote for the 65S455
TCL Roku TV Remote (RC280-style) — part number RRC280J — is the matching remote for the 65S455. Standard Roku TV IR remote - works out of the box with no pairing. OEM dealer compatibility explicitly lists 43S455 through 75S455; the classic TCL RC280 is functionally interchangeable.
Full compatibility list, substitutes and ordering advice: RRC280J remote page. Order by the part number, not the TV size — one remote covers the platform. All TCL remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 200 mm across and 200 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (65S455) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the 65S455: 200×200 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the TCL 65S455 use?
The TCL 65S455 uses a 200×200 mm VESA pattern — 200 mm between hole centers horizontally and 200 mm vertically (about 7.9×7.9 in). Any bracket whose supported range covers 200×200 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the 65S455 need for wall mounting?
The 65S455 takes M6 metric screws. Documented length: M6 x 12 mm per TCL's spec page. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the 65S455 with a hand-tightened test screw before torquing anything down.
How much does the 65S455 weigh without the stand?
The 65S455 weighs 30.9 lb (14 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 40 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the 65S455?
A bracket sold as 400×400-only will not line up with the 65S455's 200×200 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 200×200 mm, it fits directly. If not, a VESA adapter plate (200×200→400×400) bridges the difference; see our adapter guide.
How wide is the 65S455's stand?
Per the manufacturer's documentation, the 65S455's factory stand is about 50.2 in wide. Plan at least 53 in of flat, level surface: the panel can overhang the furniture, the stand cannot. If your console is narrower, a universal pedestal stand bolts into the 200×200 mm VESA holes instead.
What replacement remote works with the 65S455?
TCL Roku TV Remote (RC280-style) (part RRC280J) is the matching remote for the 65S455. Standard Roku TV IR remote - works out of the box with no pairing. OEM dealer compatibility explicitly lists 43S455 through 75S455; the classic TCL RC280 is functionally interchangeable. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the 65S455 be mounted on a full-motion bracket?
Yes. At 30.9 lb, the 65S455 is within range of full-motion arms rated 40 lb or higher — 3 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.