TCL 55Q650G VESA Size & Mount Fit
Quick answer
The TCL 55Q650G uses a 200×300 mm VESA pattern (M6 screws). Screw spec: M6 x 12 mm. The 55Q650G weighs 24.2 lb (11 kg) without the stand. Any mount rated for VESA 200×300 or larger and at least 35 lb will fit the 55Q650G. Verified against the TCL documentation — see source below.
55Q650G mounting specs
| VESA pattern | 200×300 mm (7.9×11.8 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 x 12 mm per TCL's spec page (base stand screws M5 x 30) |
| Weight without stand | 24.2 lb (11 kg) |
| Stand width | 44.7 in — feet at their widest position |
| Screen size | 55 in |
| Model year | 2023 |
| Series | Q6 QLED Google TV |
| Known aliases | 55Q650G |
| Source | Manufacturer documentation |
TCL's archived page prints 'VESA Hole Pattern: 200mm x 300mm' - the reverse axis order of the 55S555 page, so TCL's W x H convention is inconsistent; measure your unit to confirm orientation. TCL lists adjustable two-position feet but publishes only the 44.7 in wide separation.
Among the 26 verified 55-inch TVs in our database, the 55Q650G is #2 lightest of 26 at 24.2 lb — the 55-inch range here runs 22 to 41.7 lb. The 55Q650G is the only verified TCL model here on the 200×300 mm pattern — the rest are listed in the TCL hub.
Model-specific mounting notes
Non-square 200×300 mm pattern
The TCL 55Q650G uses a 200×300 mm rectangle, not a square. Mounts sold as "200×200-only" won't line up vertically — a bracket for the TCL 55Q650G must explicitly list 200×300 or cover it within its range.
Mounts that fit the 55Q650G
Filtered from our mount database: pattern covers 200×300 mm, rating is at least 35 lb (20% margin over the 55Q650G's 24.2 lb), and the 55-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the 55Q650G's 200×300 mm / 24.2 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the 55Q650G's 200×300 mm / 24.2 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the 55Q650G's 200×300 mm / 24.2 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the 55Q650G's 200×300 mm / 24.2 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mounting Dream MD2163-K Fixed
Budget fixed bracket for small and mid-size TVs with a bubble level included.
Supports VESA 75×75 up to 400×400 mm and 100 lb — clears the 55Q650G's 200×300 mm / 24.2 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the 55Q650G
The 55Q650G takes M6 bolts: M6 x 12 mm per TCL's spec page (base stand screws M5 x 30). A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the 55Q650G on furniture instead?
The 55Q650G's legs span 44.7 in at their widest position — it fits consoles at least 47 in wide, so both feet sit fully on the surface with a safety margin.
Furniture narrower than 47 in? A universal pedestal stand bolts into the same 200×300 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the 55Q650G's 24.2 lb.
Replacement remote for the 55Q650G
TCL Google TV Voice Remote (RC813) — part number RC813 — is the matching remote for the 55Q650G. Bluetooth voice remote with built-in mic for Google Assistant. OEM dealer compatibility explicitly lists 55Q650G through 85Q650G; the often-suggested RC902V did NOT verify for the Q650G series.
Full compatibility list, substitutes and ordering advice: RC813 remote page. Order by the part number, not the TV size — one remote covers the platform. All TCL remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 200 mm across and 300 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (55Q650G) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the 55Q650G: 200×300 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the TCL 55Q650G use?
The TCL 55Q650G uses a 200×300 mm VESA pattern — 200 mm between hole centers horizontally and 300 mm vertically (about 7.9×11.8 in). Any bracket whose supported range covers 200×300 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the 55Q650G need for wall mounting?
The 55Q650G takes M6 metric screws. Documented length: M6 x 12 mm per TCL's spec page (base stand screws M5 x 30). A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the 55Q650G with a hand-tightened test screw before torquing anything down.
How much does the 55Q650G weigh without the stand?
The 55Q650G weighs 24.2 lb (11 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 35 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the 55Q650G?
A bracket sold as 400×400-only will not line up with the 55Q650G's 200×300 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 200×300 mm, it fits directly. If not, a VESA adapter plate (200×300→400×400) bridges the difference; see our adapter guide.
How far apart are the legs on the 55Q650G?
The 55Q650G's feet at their widest position span about 44.7 in across the outside edges. A console at least 47 in wide lets both feet sit fully on the surface (the manual also documents a narrower inner position). Narrower furniture calls for a pedestal stand that bolts into the 200×300 mm VESA holes.
What replacement remote works with the 55Q650G?
TCL Google TV Voice Remote (RC813) (part RC813) is the matching remote for the 55Q650G. Bluetooth voice remote with built-in mic for Google Assistant. OEM dealer compatibility explicitly lists 55Q650G through 85Q650G; the often-suggested RC902V did NOT verify for the Q650G series. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the 55Q650G be mounted on a full-motion bracket?
Yes. At 24.2 lb, the 55Q650G is within range of full-motion arms rated 35 lb or higher — 5 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.