TCL 55S555 VESA Size & Mount Fit
Quick answer
The TCL 55S555 uses a 300×200 mm VESA pattern (M6 screws). Screw spec: M6 x 12 mm. The 55S555 weighs 33.3 lb (15.1 kg) without the stand. Any mount rated for VESA 300×200 or larger and at least 45 lb will fit the 55S555. Verified against the TCL documentation — see source below.
55S555 mounting specs
| VESA pattern | 300×200 mm (11.8×7.9 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 x 12 mm per TCL's spec page (base stand screws are the longer M4 x 36) |
| Weight without stand | 33.3 lb (15.1 kg) |
| Stand width | 42.3 in — feet at their widest position |
| Screen size | 55 in |
| Model year | 2022 |
| Series | 5-Series QLED Roku TV |
| Known aliases | 55S555-CA |
| Source | Manufacturer documentation |
TCL's own archived spec page prints 300mm x 200mm - the reverse of what third-party databases claimed - plus a useful datum: top of VESA mount to top of TV is 8.2 in. Two-position feet per TCL's page: 42.3 in wide or 22.7 in narrow.
Among the 26 verified 55-inch TVs in our database, the 55S555 is #18 lightest of 26 at 33.3 lb — the 55-inch range here runs 22 to 41.7 lb. The 55S555 is the only verified TCL model here on the 300×200 mm pattern — the rest are listed in the TCL hub.
Mounts that fit the 55S555
Filtered from our mount database: pattern covers 300×200 mm, rating is at least 45 lb (20% margin over the 55S555's 33.3 lb), and the 55-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the 55S555's 300×200 mm / 33.3 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the 55S555's 300×200 mm / 33.3 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the 55S555's 300×200 mm / 33.3 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the 55S555's 300×200 mm / 33.3 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mounting Dream MD2163-K Fixed
Budget fixed bracket for small and mid-size TVs with a bubble level included.
Supports VESA 75×75 up to 400×400 mm and 100 lb — clears the 55S555's 300×200 mm / 33.3 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the 55S555
The 55S555 takes M6 bolts: M6 x 12 mm per TCL's spec page (base stand screws are the longer M4 x 36). A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the 55S555 on furniture instead?
The 55S555's legs span 42.3 in at their widest position — it fits consoles at least 45 in wide, so both feet sit fully on the surface with a safety margin.
Furniture narrower than 45 in? A universal pedestal stand bolts into the same 300×200 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the 55S555's 33.3 lb.
Replacement remote for the 55S555
TCL Roku TV Remote — part number RC280 — is the matching remote for the 55S555. Standard Roku TV IR remote - no voice or mic. Sold as the replacement explicitly covering 55S555 65S555 and 75S555; whether the S555 originally boxed an IR or voice Roku remote is not documented by TCL.
Full compatibility list, substitutes and ordering advice: RC280 remote page. Order by the part number, not the TV size — one remote covers the platform. All TCL remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 300 mm across and 200 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (55S555) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the 55S555: 300×200 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the TCL 55S555 use?
The TCL 55S555 uses a 300×200 mm VESA pattern — 300 mm between hole centers horizontally and 200 mm vertically (about 11.8×7.9 in). Any bracket whose supported range covers 300×200 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the 55S555 need for wall mounting?
The 55S555 takes M6 metric screws. Documented length: M6 x 12 mm per TCL's spec page (base stand screws are the longer M4 x 36). A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the 55S555 with a hand-tightened test screw before torquing anything down.
How much does the 55S555 weigh without the stand?
The 55S555 weighs 33.3 lb (15.1 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 45 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the 55S555?
A bracket sold as 400×400-only will not line up with the 55S555's 300×200 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 300×200 mm, it fits directly. If not, a VESA adapter plate (300×200→400×400) bridges the difference; see our adapter guide.
How far apart are the legs on the 55S555?
The 55S555's feet at their widest position span about 42.3 in across the outside edges. A console at least 45 in wide lets both feet sit fully on the surface (the manual also documents a narrower inner position). Narrower furniture calls for a pedestal stand that bolts into the 300×200 mm VESA holes.
What replacement remote works with the 55S555?
TCL Roku TV Remote (part RC280) is the matching remote for the 55S555. Standard Roku TV IR remote - no voice or mic. Sold as the replacement explicitly covering 55S555 65S555 and 75S555; whether the S555 originally boxed an IR or voice Roku remote is not documented by TCL. Order by the part number rather than by TV size — one remote covers the whole platform.
Can the 55S555 be mounted on a full-motion bracket?
Yes. At 33.3 lb, the 55S555 is within range of full-motion arms rated 45 lb or higher — 5 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.