Hisense 55A6H VESA Size & Mount Fit
Quick answer
The Hisense 55A6H uses a 200×300 mm VESA pattern (M6 screws). Screw spec: M6. The 55A6H weighs 24.9 lb (11.3 kg) without the stand. Any mount rated for VESA 200×300 or larger and at least 35 lb will fit the 55A6H. Verified against the Hisense documentation — see source below.
55A6H mounting specs
| VESA pattern | 200×300 mm (7.9×11.8 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 per the Hisense spec sheet - length not documented |
| Weight without stand | 24.9 lb (11.3 kg) |
| Stand footprint (W×D) | 39.8 × 8.9 in — stand footprint |
| Screen size | 55 in |
| Model year | 2022 |
| Series | A6 Series Google TV |
| Known aliases | 55A6H |
| Source | Manufacturer documentation |
Spec sheet prints 'VESA: M6 200 x 300' without labeling axes; measure your unit to confirm orientation before drilling. Same platform as the Toshiba 55C350KU.
Among the 26 verified 55-inch TVs in our database, the 55A6H is #4 lightest of 26 at 24.9 lb — the 55-inch range here runs 22 to 41.7 lb. Within Hisense, the 50A6H, 55A65K share the 55A6H's 200×300 mm pattern.
Model-specific mounting notes
Non-square 200×300 mm pattern
The Hisense 55A6H uses a 200×300 mm rectangle, not a square. Mounts sold as "200×200-only" won't line up vertically — a bracket for the Hisense 55A6H must explicitly list 200×300 or cover it within its range.
Mounts that fit the 55A6H
Filtered from our mount database: pattern covers 200×300 mm, rating is at least 35 lb (20% margin over the 55A6H's 24.9 lb), and the 55-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the 55A6H's 200×300 mm / 24.9 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the 55A6H's 200×300 mm / 24.9 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the 55A6H's 200×300 mm / 24.9 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the 55A6H's 200×300 mm / 24.9 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mounting Dream MD2163-K Fixed
Budget fixed bracket for small and mid-size TVs with a bubble level included.
Supports VESA 75×75 up to 400×400 mm and 100 lb — clears the 55A6H's 200×300 mm / 24.9 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the 55A6H
The 55A6H takes M6 bolts: M6 per the Hisense spec sheet - length not documented. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the 55A6H on furniture instead?
Per Hisense's documentation, the 55A6H's factory stand is 39.8 in wide and 8.9 in deep — plan a console at least 42 in wide and 11 in deep. The panel can overhang the furniture; the stand cannot.
Furniture narrower than 42 in? A universal pedestal stand bolts into the same 200×300 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the 55A6H's 24.9 lb.
Replacement remote for the 55A6H
Hisense Google TV Remote (OEM) — part number T299843 — is the matching remote for the 55A6H. Bluetooth + IR voice remote with Google TV shortcut keys; 2 AAA batteries. Hisense USA's own parts store lists this OEM remote for the U6K A6H and A65K lines explicitly (55/65/75U6K and 43-75 in A-series).
Full compatibility list, substitutes and ordering advice: T299843 remote page. Order by the part number, not the TV size — one remote covers the platform. All Hisense remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 200 mm across and 300 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (55A6H) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the 55A6H: 200×300 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Hisense 55A6H use?
The Hisense 55A6H uses a 200×300 mm VESA pattern — 200 mm between hole centers horizontally and 300 mm vertically (about 7.9×11.8 in). Any bracket whose supported range covers 200×300 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the 55A6H need for wall mounting?
The 55A6H takes M6 metric screws. Documented length: M6 per the Hisense spec sheet - length not documented. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the 55A6H with a hand-tightened test screw before torquing anything down.
How much does the 55A6H weigh without the stand?
The 55A6H weighs 24.9 lb (11.3 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 35 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the 55A6H?
A bracket sold as 400×400-only will not line up with the 55A6H's 200×300 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 200×300 mm, it fits directly. If not, a VESA adapter plate (200×300→400×400) bridges the difference; see our adapter guide.
How wide is the 55A6H's stand?
Per the manufacturer's documentation, the 55A6H's factory stand is about 39.8 in wide and 8.9 in deep. Plan at least 42 in of flat, level surface: the panel can overhang the furniture, the stand cannot. If your console is narrower, a universal pedestal stand bolts into the 200×300 mm VESA holes instead.
What replacement remote works with the 55A6H?
Hisense Google TV Remote (OEM) (part T299843) is the matching remote for the 55A6H. Bluetooth + IR voice remote with Google TV shortcut keys; 2 AAA batteries. Hisense USA's own parts store lists this OEM remote for the U6K A6H and A65K lines explicitly (55/65/75U6K and 43-75 in A-series). Order by the part number rather than by TV size — one remote covers the whole platform.
Can the 55A6H be mounted on a full-motion bracket?
Yes. At 24.9 lb, the 55A6H is within range of full-motion arms rated 35 lb or higher — 5 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.