Hisense 55U6K VESA Size & Mount Fit
Quick answer
The Hisense 55U6K uses a 400×200 mm VESA pattern (M6 screws). Screw spec: M6 - length not documented on the spec sheet. The 55U6K weighs 30.4 lb (13.8 kg) without the stand. Any mount rated for VESA 400×200 or larger and at least 40 lb will fit the 55U6K. Verified against the Hisense documentation — see source below.
55U6K mounting specs
| VESA pattern | 400×200 mm (15.7×7.9 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 - length not documented on the spec sheet; hand-test first |
| Weight without stand | 30.4 lb (13.8 kg) |
| Stand footprint (W×D) | 39.1 × 12.1 in — stand footprint |
| Screen size | 55 in |
| Model year | 2023 |
| Series | U6K Mini-LED ULED |
| Known aliases | 55U6K |
| Source | Manufacturer documentation |
Official Hisense USA spec sheet states 'VESA Standard (400*200) M6' - a wide, short rectangle; mounts sold as square-only will not line up.
Among the 26 verified 55-inch TVs in our database, the 55U6K is #12 lightest of 26 at 30.4 lb — the 55-inch range here runs 22 to 41.7 lb. The 55U6K is the only verified Hisense model here on the 400×200 mm pattern — the rest are listed in the Hisense hub.
Model-specific mounting notes
Non-square 400×200 mm pattern
The Hisense 55U6K uses a 400×200 mm rectangle, not a square. Mounts sold as "400×400-only" won't line up vertically — a bracket for the Hisense 55U6K must explicitly list 400×200 or cover it within its range.
Mounts that fit the 55U6K
Filtered from our mount database: pattern covers 400×200 mm, rating is at least 40 lb (20% margin over the 55U6K's 30.4 lb), and the 55-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the 55U6K's 400×200 mm / 30.4 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the 55U6K's 400×200 mm / 30.4 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the 55U6K's 400×200 mm / 30.4 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the 55U6K's 400×200 mm / 30.4 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mounting Dream MD2163-K Fixed
Budget fixed bracket for small and mid-size TVs with a bubble level included.
Supports VESA 75×75 up to 400×400 mm and 100 lb — clears the 55U6K's 400×200 mm / 30.4 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the 55U6K
The 55U6K takes M6 bolts: M6 - length not documented on the spec sheet; hand-test first. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the 55U6K on furniture instead?
Per Hisense's documentation, the 55U6K's factory stand is 39.1 in wide and 12.1 in deep — plan a console at least 42 in wide and 15 in deep. The panel can overhang the furniture; the stand cannot.
Furniture narrower than 42 in? A universal pedestal stand bolts into the same 400×200 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the 55U6K's 30.4 lb.
Replacement remote for the 55U6K
Hisense Google TV Remote (OEM) — part number T299843 — is the matching remote for the 55U6K. Bluetooth + IR voice remote with Google TV shortcut keys; 2 AAA batteries. Hisense USA's own parts store lists this OEM remote for the U6K A6H and A65K lines explicitly (55/65/75U6K and 43-75 in A-series).
Full compatibility list, substitutes and ordering advice: T299843 remote page. Order by the part number, not the TV size — one remote covers the platform. All Hisense remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 400 mm across and 200 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (55U6K) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the 55U6K: 400×200 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Hisense 55U6K use?
The Hisense 55U6K uses a 400×200 mm VESA pattern — 400 mm between hole centers horizontally and 200 mm vertically (about 15.7×7.9 in). Any bracket whose supported range covers 400×200 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the 55U6K need for wall mounting?
The 55U6K takes M6 metric screws. Documented length: M6 - length not documented on the spec sheet; hand-test first. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the 55U6K with a hand-tightened test screw before torquing anything down.
How much does the 55U6K weigh without the stand?
The 55U6K weighs 30.4 lb (13.8 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 40 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 600×400 mount fit the 55U6K?
A bracket sold as 600×400-only will not line up with the 55U6K's 400×200 mm holes. Most 600×400 mounts, however, support a range of patterns — if the spec sheet lists 400×200 mm, it fits directly. If not, a VESA adapter plate (400×200→600×400) bridges the difference; see our adapter guide.
How wide is the 55U6K's stand?
Per the manufacturer's documentation, the 55U6K's factory stand is about 39.1 in wide and 12.1 in deep. Plan at least 42 in of flat, level surface: the panel can overhang the furniture, the stand cannot. If your console is narrower, a universal pedestal stand bolts into the 400×200 mm VESA holes instead.
What replacement remote works with the 55U6K?
Hisense Google TV Remote (OEM) (part T299843) is the matching remote for the 55U6K. Bluetooth + IR voice remote with Google TV shortcut keys; 2 AAA batteries. Hisense USA's own parts store lists this OEM remote for the U6K A6H and A65K lines explicitly (55/65/75U6K and 43-75 in A-series). Order by the part number rather than by TV size — one remote covers the whole platform.
Can the 55U6K be mounted on a full-motion bracket?
Yes. At 30.4 lb, the 55U6K is within range of full-motion arms rated 40 lb or higher — 5 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.