Hisense 65U6K VESA Size & Mount Fit
Quick answer
The Hisense 65U6K uses a 400×300 mm VESA pattern (M6 screws). Screw spec: M6 - length not documented on the spec sheet. The 65U6K weighs 43.4 lb (19.7 kg) without the stand. Any mount rated for VESA 400×300 or larger and at least 55 lb will fit the 65U6K. Verified against the Hisense documentation — see source below.
65U6K mounting specs
| VESA pattern | 400×300 mm (15.7×11.8 in) |
|---|---|
| Screw thread | M6 |
| Screw length | M6 - length not documented on the spec sheet; hand-test first |
| Weight without stand | 43.4 lb (19.7 kg) |
| Stand footprint (W×D) | 46.2 × 11.8 in — feet at their widest position |
| Screen size | 65 in |
| Model year | 2023 |
| Series | U6K Mini-LED ULED |
| Known aliases | 65U6K |
| Source | Manufacturer documentation |
The 65 in U6K moves to a taller 400x300 rectangle than the 55 in's 400x200 and adds 13 lb - the two sizes need different bracket checks. Two-position stand per the sheet: wide 46.2 in or narrow 27.7 in, both 11.8 in deep.
Among the 21 verified 65-inch TVs in our database, the 65U6K is #9 lightest of 21 at 43.4 lb — the 65-inch range here runs 30.9 to 56.4 lb. Within Hisense, the 55U8K shares the 65U6K's 400×300 mm pattern.
Mounts that fit the 65U6K
Filtered from our mount database: pattern covers 400×300 mm, rating is at least 55 lb (20% margin over the 65U6K's 43.4 lb), and the 65-inch screen is within the listed range.
EchoGear EGLF2 Full Motion
Smooth dual-arm full motion with 22 in of extension for corner installs.
Supports VESA 100×100 up to 600×400 mm and 125 lb — clears the 65U6K's 400×300 mm / 43.4 lb.
Wall: 16-in dual stud required
EchoGear EGLT1 Tilting
Deep 15-degree tilt for bedroom and above-fireplace placements.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the 65U6K's 400×300 mm / 43.4 lb.
Wall: 16-in dual stud required
EchoGear EGLL1 Low-Profile Fixed
Ultra-low-profile fixed mount that keeps the TV about an inch off the wall.
Supports VESA 200×200 up to 600×400 mm and 125 lb — clears the 65U6K's 400×300 mm / 43.4 lb.
Wall: 16-in dual stud required
Mount-It! MI-509B Ceiling
Ceiling mount for larger screens with tilt and telescoping height.
Supports VESA 100×100 up to 600×400 mm and 110 lb — clears the 65U6K's 400×300 mm / 43.4 lb.
Wall: lag-bolt into a ceiling joist per the manual
Pipishell PISF1 Fixed
Heavy-duty fixed plate for big panels; sits low and rigid.
Supports VESA 200×200 up to 600×400 mm and 132 lb — clears the 65U6K's 400×300 mm / 43.4 lb.
Wall: 16-in dual stud required
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the 65U6K
The 65U6K takes M6 bolts: M6 - length not documented on the spec sheet; hand-test first. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the 65U6K on furniture instead?
The 65U6K's legs span 46.2 in at their widest position, each foot running 11.8 in front to back — it fits consoles at least 49 in wide and 14 in deep, so both feet sit fully on the surface with a safety margin.
Furniture narrower than 49 in? A universal pedestal stand bolts into the same 400×300 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the 65U6K's 43.4 lb.
Replacement remote for the 65U6K
Hisense Google TV Remote (OEM) — part number T299843 — is the matching remote for the 65U6K. Bluetooth + IR voice remote with Google TV shortcut keys; 2 AAA batteries. Hisense USA's own parts store lists this OEM remote for the U6K A6H and A65K lines explicitly (55/65/75U6K and 43-75 in A-series).
Full compatibility list, substitutes and ordering advice: T299843 remote page. Order by the part number, not the TV size — one remote covers the platform. All Hisense remotes are on the brand hub.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 400 mm across and 300 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (65U6K) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the 65U6K: 400×300 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Hisense 65U6K use?
The Hisense 65U6K uses a 400×300 mm VESA pattern — 400 mm between hole centers horizontally and 300 mm vertically (about 15.7×11.8 in). Any bracket whose supported range covers 400×300 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the 65U6K need for wall mounting?
The 65U6K takes M6 metric screws. Documented length: M6 - length not documented on the spec sheet; hand-test first. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the 65U6K with a hand-tightened test screw before torquing anything down.
How much does the 65U6K weigh without the stand?
The 65U6K weighs 43.4 lb (19.7 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 55 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 600×400 mount fit the 65U6K?
A bracket sold as 600×400-only will not line up with the 65U6K's 400×300 mm holes. Most 600×400 mounts, however, support a range of patterns — if the spec sheet lists 400×300 mm, it fits directly. If not, a VESA adapter plate (400×300→600×400) bridges the difference; see our adapter guide.
How far apart are the legs on the 65U6K?
The 65U6K's feet at their widest position span about 46.2 in across the outside edges, with a front-to-back depth of 11.8 in. A console at least 49 in wide lets both feet sit fully on the surface (the manual also documents a narrower inner position). Narrower furniture calls for a pedestal stand that bolts into the 400×300 mm VESA holes.
What replacement remote works with the 65U6K?
Hisense Google TV Remote (OEM) (part T299843) is the matching remote for the 65U6K. Bluetooth + IR voice remote with Google TV shortcut keys; 2 AAA batteries. Hisense USA's own parts store lists this OEM remote for the U6K A6H and A65K lines explicitly (55/65/75U6K and 43-75 in A-series). Order by the part number rather than by TV size — one remote covers the whole platform.
Can the 65U6K be mounted on a full-motion bracket?
Yes. At 43.4 lb, the 65U6K is within range of full-motion arms rated 55 lb or higher — 3 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.