Vizio V555-J01 VESA Size & Mount Fit
Quick answer
The Vizio V555-J01 uses a 300×200 mm VESA pattern (M6 screws). Screw spec: M6, 4 screws. The V555-J01 weighs 30.1 lb (13.7 kg) without the stand. Any mount rated for VESA 300×200 or larger and at least 40 lb will fit the V555-J01. Verified against the Vizio documentation — see source below.
V555-J01 mounting specs
support.vizio.com model-info page: 300x200 / M6 / hole depth 14 mm / 30.14 lb (13.67 kg) without stand; outer feet 40.7 in apart, stand depth 10.07 in. Same 300x200 pattern as LG's C-series OLEDs. Corroborated by Vizio's 2021 V5-Series manual on cdn.vizio.com.
Weight vs. required mount rating
Among the 31 verified 55-inch TVs in our database, the V555-J01 is #14 lightest of 31 at 30.1 lb — the 55-inch range here runs 22 to 41.9 lb. Within Vizio, the M55Q6-J01 shares the V555-J01's 300×200 mm pattern.
Mounts that fit the V555-J01
Filtered from our mount database: pattern covers 300×200 mm, rating is at least 40 lb (20% margin over the V555-J01's 30.1 lb), and the 55-inch screen is within the listed range.
VideoSecu ML531BE Full Motion
Budget articulating mount with a removable VESA plate for tight patterns.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the V555-J01's 300×200 mm / 30.1 lb.
Wall: single stud OK
PERLESMITH PSTK1 Tilting
Compact tilting bracket for small rooms and single-stud walls.
Supports VESA 75×75 up to 400×400 mm and 115 lb — clears the V555-J01's 300×200 mm / 30.1 lb.
Wall: single stud OK
PERLESMITH PSMFK1 Fixed
Slim fixed mount with quick-release tabs for easy cable access.
Supports VESA 75×75 up to 400×400 mm and 88 lb — clears the V555-J01's 300×200 mm / 30.1 lb.
Wall: single stud OK
VIVO MOUNT-VC55 Ceiling
Adjustable-height ceiling pole with 360-degree swivel for open layouts.
Supports VESA 100×100 up to 400×400 mm and 110 lb — clears the V555-J01's 300×200 mm / 30.1 lb.
Wall: lag-bolt into a ceiling joist per the manual
Mounting Dream MD2163-K Fixed
Budget fixed bracket for small and mid-size TVs with a bubble level included.
Supports VESA 75×75 up to 400×400 mm and 100 lb — clears the V555-J01's 300×200 mm / 30.1 lb.
Wall: single stud OK
Not sure between two of them? Run the Will It Fit checker for a verdict with reasons.
Screws & spacers for the V555-J01
The V555-J01 takes M6 bolts: M6, 4 screws (not included), max hole depth 14 mm per Vizio's model-info page - keep bolts short. A bolt longer than the documented spec can bottom out against internal components and damage the panel — thread a screw in by hand first and confirm it seats before mounting the TV.
If your mount's hardware kit doesn't include the right length, a universal TV hardware kit covers M4–M8 in common lengths. More detail in the screw size guide.
Standing the V555-J01 on furniture instead?
The V555-J01's legs span 40.7 in, each foot running 10.1 in front to back — it fits consoles at least 43 in wide and 13 in deep, so both feet sit fully on the surface with a safety margin.
Furniture narrower than 43 in? A universal pedestal stand bolts into the same 300×200 mm VESA holes (M6 screws) and stands on a single center column — the usual fix instead of replacing the console. Check its weight rating against the V555-J01's 30.1 lb.
Double-check before buying
- Remove any plastic hole plugs on the back panel and confirm all 4 threaded holes are present and undamaged.
- Measure hole spacing center-to-center in millimeters — you should get 300 mm across and 200 mm vertically.
- Compare the model number on the back-panel sticker with the one on this page (V555-J01) — retail variants can differ.
How to verify yourself
- Lay the TV screen-down on a soft, flat surface and locate the 4 threaded holes on the back.
- Measure horizontally between the centers of the upper holes, then vertically between an upper and a lower hole — in millimeters.
- Match the two numbers to a standard pattern (for the V555-J01: 300×200 mm). Full walkthrough with photos of what to avoid: how to measure VESA.
Frequently asked questions
What VESA pattern does the Vizio V555-J01 use?
The Vizio V555-J01 uses a 300×200 mm VESA pattern — 300 mm between hole centers horizontally and 200 mm vertically (about 11.8×7.9 in). Any bracket whose supported range covers 300×200 mm will line up. Confirm on the back panel before ordering, since retail variants of a series occasionally differ.
What size screws does the V555-J01 need for wall mounting?
The V555-J01 takes M6 metric screws. Documented length: M6, 4 screws (not included), max hole depth 14 mm per Vizio's model-info page - keep bolts short. A bolt that is too long can bottom out and damage the panel or internals, so verify thread depth on the V555-J01 with a hand-tightened test screw before torquing anything down.
How much does the V555-J01 weigh without the stand?
The V555-J01 weighs 30.1 lb (13.7 kg) without the stand or cables. For a 20% safety margin, pick a mount rated for at least 40 lb. Anchoring matters as much as the rating: at this weight, one properly hit stud is usually enough, but follow your mount's instructions.
Will a 400×400 mount fit the V555-J01?
A bracket sold as 400×400-only will not line up with the V555-J01's 300×200 mm holes. Most 400×400 mounts, however, support a range of patterns — if the spec sheet lists 300×200 mm, it fits directly. If not, a VESA adapter plate (300×200→400×400) bridges the difference; see our adapter guide.
How far apart are the legs on the V555-J01?
The V555-J01's feet span about 40.7 in across the outside edges, with a front-to-back depth of 10.1 in. A console at least 43 in wide lets both feet sit fully on the surface. Narrower furniture calls for a pedestal stand that bolts into the 300×200 mm VESA holes.
Can the V555-J01 be mounted on a full-motion bracket?
Yes. At 30.1 lb, the V555-J01 is within range of full-motion arms rated 40 lb or higher — 5 full-motion mount(s) in our database clear it. Articulating arms add leverage on the wall, so stud anchoring per the mount manufacturer's instructions is more important than with fixed brackets.